What is the translation of " ETCHING " in Chinese?

• 蚀刻
• 刻蚀

Examples of using Etching in English and their translations into Chinese

Angel Etching.
天刻蚀.

Customize swords with laser etching.
激光蚀刻机LaserEtching.

You might end up etching away 90 or even 95 percent of the material.
最终你可能会蚀刻掉90%甚至95%的材料。

Too acidic will slow drying, etching plates;
酸性太强会使油墨干燥变慢，腐蚀印版;

New laser etching technology will make common metal become idiosyncratic material.
新型激光刻蚀技术将普通金属变成特质材料.

Songs and Ballads of Shakespeare Illustrated by the Etching Club.
莎士比亚的歌曲和民谣，由蚀刻俱乐部.

However, the yield and productivity of the dry etching process is much(15 to 20 times) lower than the wet process.
不过，干法蚀刻过程的产量和生产率远远低于湿法过程（15到20倍）。

Besides painting, Rembrandt was also interested in etching and drawing.
除了绘画，伦勃朗还致力于雕刻和素描。

Moreover, aluminium plasma etching in the semiconductor manufacture was recognised as an HCBD source(US EPA, 2000).
此外，半导体制造中铝的等离子体刻蚀被认为是六氯丁二烯的一个来源（美国环保局，2000年）。

Great tool and looking forward to see what you come up with the glass etching.
很好的工具，期待看到你的玻璃蚀刻出什么。

This etching of a landscape during autumn in Holland is part of a series of the seasons made by Jan van de Velde in 1617.
荷兰秋季的景观蚀刻是janvandevelde于1617年制作的一系列季节的一部分。

In June 1890, he painted several portraits of his doctor, including Portrait of Dr Gachet, and his only etching.
年6月,他画了几个他的医生的肖像,包括《加歇医生,他只蚀刻。

In addition, the electrode bulb needs periodic etching to ensure that a fresh layer of sensing glass is exposed prior to measurement.
此外，电极灯泡需要定期蚀刻以确保在测量之前暴露出新的传感玻璃层。

The disadvantage is that the deposited film is about 2 μm, which is far lower than the 18 μm of etching and plating.
缺点是沉积的膜约为2μm，远低于18μm的蚀刻和电镀。

(3) Fine pattern: The accuracy of the etching method can reach 0.2 mm, which is suitable for flipping the chip directly on the antenna;
精细图案：蚀刻方法精度可达0.2mm，适合直接在天线上翻转芯片;

In this design, light falls onto the back of the CCD in a region that has been thinned by etching until it is transparent.
在本设计中，光落到后面的CCD的区域中，已经通过蚀刻减薄，直到它是透明的。

This etching of a landscape during springtime in Holland is part of a series of the seasons made by Jan van de Velde in 1617.
这种在荷兰春天的景观蚀刻是由janvandevelde于1617年制作的一系列季节的一部分。

In many ferrous metals, this scale is uneven, and begins the process of pitting or etching that starts to weaken the material.
在许多黑色金属中，这种氧化皮是不均匀的，并且开始了点蚀或蚀刻过程，从而开始削弱材料。

Potassium Hydroxide(KOH) etching is an important process in the fabrication of microdevices, and is used to remove material from a silicon wafer.
氢氧化钾蚀刻（KOH）是制造微型器件的一个重要工艺，用于从硅片上去除材料。

In extreme cases, this can lead to catastrophic failure, including extreme pitting, etching and/or total dissolution of the entire component.
在极端情况下，这可能导致灾难性的失败，包括极端的凹陷、蚀刻或整个部件的完全溶解。

Dry”(plasma) etching is used for circuit-defining steps, while“wet” etching(using chemical baths) is used mainly to clean wafers.
干法”（等离子）刻蚀用于形成电路，而“湿法”刻蚀（使用化学浴）主要用于清洁晶圆。

For example, if a light plastic material is discoloured during laser etching, soot particles may be produced that will result in a dark marking.
例如，如果在激光蚀刻期间轻质塑料材料变色，则可能产生将导致暗标记的烟灰颗粒。

The investment in Fab 6 will enable TMC to install manufacturing equipment for 96-layer 3D Flash memories, including deposition and etching equipment.
对6号晶圆厂的投资将使东芝存储器公司能够安装96层3D闪存的制造设备，包括沉积和蚀刻设备。

Since the polymer only dissolves very slowly in the chemical part of the etching, it builds up on the sidewalls and protects them from etching.
由于聚合物只溶解很慢，在化学蚀刻部分，它建立在侧壁和保护他们从蚀刻。

In addition, he is also curious whether the combination of the two will make Lam's strategy focus away from the original core competitiveness- etching technology.
另外，他也很好奇双方的结合是否会让Lam的策略焦点偏离原先的核心竞争力──蚀刻技术。

Currently, there is no single etching recipe and mask that allows etching throughout the microcavity, so we decided to develop a new method.”.
目前，没有一个单一的蚀刻配方和掩模，允许能在整个微腔蚀刻，所以我们决定开发一种新的方法。

Furthermore, different vacuum holding devices on the microscopes(fig. 1) are used in etching and coating processes, or in lithography systems.
此外，在显微镜上不同的真空夹持装置（图1）使用（图1）于蚀刻和涂布过程，或在光刻系统中。

Wu Hanming developed high-density plasma etching and developed the world's first commercial software that can perform plasma process simulation and is widely used.
吴汉明研发高密度等离子体刻蚀，研发了世界上第一套可以进行等离子体工艺模拟的商业软件并得到广泛使用。

During manufacturing of integrated circuits(ICs), it is necessary to perform many deposition and etching steps to build the necessary internal structures.
在集成电路（IC）的制造过程中，需要进行许多沉积和蚀刻步骤来构建必要的内部结构。

SCHOTT's photo-sensitive FOTURAN® II glass wafers can be structured and processed in three or four steps: UV-exposure, tempering, etching and ceramization.
肖特的光敏FOTURAN®II玻璃晶圆可通过三或四个步骤进行构型和加工：紫外曝光、回火、蚀刻和陶瓷化。