What is the translation of " LAYER THICKNESS " in Chinese?

• 层厚度
• 的层厚度

Examples of using Layer thickness in English and their translations into Chinese

D printed lines of bacteria in varying layer thicknesses.
D打印不同层厚度的细菌线.

The Z-axis, that is, the layer thickness, can be set in 25-μm increments.
Z轴，即层厚度，可以以25μm的增量设置。

Conversely, total ozone is lowest in the tropics because the ozone layer thickness is small.
相反，热带地区的臭氧总量就比较少，因为臭氧层的厚度很薄。

It also lowers layer thickness from over 500 down to a range of 10 to 250 microns.
它还可以将层厚度从500以下降低到10到250微米。

X-ray reflectometry(XRR) determines layer thickness, roughness, and density.
X射线反射（XRR）确定膜厚，粗糙度和密度。

The zinc layer thickness is greater than 85UM, which conforms to zbj3601-89 standard?
锌层厚度大于85UM,符合ZBJ3601-89标准,?

X-ray reflectometry(XRR) determines layer thickness, roughness, and density.
X射线反射率（XRR）测定层厚度、粗糙度和密度。

So the dust layer thickness can t be used as proof of a young moon(or of an old one either).
因此，尘埃层的厚度不能用来证明月亮是年轻的(或月亮是年老的)。

LAD also allows for greater control over layer thicknesses, which can decrease EFI values.
运用IAD，还可以对层厚度进行更好的控制，如此能降低EFI值.

The layer thickness is typically 5 microns, while the wavelength of visible light is around 0.5 micron.
该层的厚度通常为5微米，而可见光的波长约为0.5微米。

The adhesive can serve as a constructive element, since almost any layer thickness is possible.
粘合剂可以用作构造性元素，因为几乎任何胶层厚度都可以实现粘接。

Benefits: Strict control of dielectric layer thickness can reduce the expected deviation of electrical performance.
好处：严格控制介电层厚度能降低电气性能预期值偏差。

Ma Jianying said that ultra-thin plastic bags refer to plastic bags with a single layer thickness of less than 0.025 mm.
马建骥说，超薄塑料袋指的是单层厚度小于0.025毫米的塑料袋。

In any case, the resolution can be given in layer thickness, while in the XY plane, it can be given by dots per inch(dpi).
在任何情况下，分辨率可以以层厚度给出，而在XY平面中，它可以由每英寸点数（dpi）给出。

The Lund students will keep working on the chocolate 3D printing technology, however, to improve layer thickness, accuracy, and more.
隆德学生将继续致力于巧克力3D打印技术，以提高层厚度，精度等等。

Short of increasing the I layer thickness, which also produces increased series resistance, there was nothing else the design engineer could do.
除了增加I层厚度（这也会增加串联电阻），设计工程师别无他法。

Shallow seismic data(e.g. 3.5 kHz) regarding transparent layer thickness, hiatuses and other structure.
浅层地震测量数据(如3.5kHz)：穿透层厚度、间断和其他构造.

The process can create layer thicknesses on the order of 400nm, however it is not ideal for anything beyond micro-sized applications.
该工艺可以在400纳米的量级上创建的层厚度，但它在一些超过微尺度的对象上的应用并不理想。

By adjusting the diameter of the steel wires and plastic layer thickness, different pressure level pipes can be produced.
通过调整钢丝直径和塑料层厚度，可以得到不同的管道压力等级。

Typical layer thickness is around 100 µm(250 DPI), although some machines can print layers as thin as 16 µm(1,600 DPI).
典型的层厚度约为100μm（250DPI），但有些机器可以打印薄至16μm（1,600DPI）的层。

Ordinary solid wood floors and three-layer parquet products most of the surface layer thickness is about 4 mm, it is generally suitable for renovation.
普通的实木地板和三层实木地板，表层厚度是3毫米甚至达到4毫米，因此一般都适合翻新。

The higher the layer thickness, the more texture and more significant, which will affect the size of the shaped body, surface error and roughness.
层厚度越高，纹理越多，更显著，这将影响成形体的尺寸、表面的误差和粗糙度。

Ordinary solid wood floors and three-layer parquet products most of the surface layer thickness is about 4 mm, it is generally suitable for renovation.
普通的实木地板和三层实木复合地板的产品大多数表层厚度是4毫米左右，因此一般都适合翻新。

Since a standard layer thickness is about 0.2mm, information can be embedded in a relatively small area ranging from several millimeters to a few centimeters.
由于标准层的厚度约为0．2mm，因此信息可以嵌入在一个相对较小的区域，范围从几毫米到几厘米不等。

X-ray Reflectometry(XRR) and Micro-XRF technologies enable non-destructive determination of the layer thickness, even for sub-surfaces layers.
X射线反射计（XRR）和Micro-XRF技术可以无损地确定层厚度，即使对于次表面层也是如此。

Two-dimensional(2D) materials with atomic layer thickness have received extensive attention due to their unique physical and chemical properties.
具有原子层厚度的二维（2D）材料因具有独特物理化学性质而受到广泛的关注。

Solar water heater foam layer thickness is generally between 50mm-70mm, the actual insulation performance depends on the manufacturer's foam machinery, standardized mold and process technology.
太阳能热水器的发泡层厚度一般在50mm-70mm之间，实际保温性能则取决于生产厂家的发泡机械、标准化模具和工艺技术水平。

One suggested application for the technology is in layer thickness measurements- critical for the quality control inspection of paints and other coatings.
该技术的一个建议应用是涂层厚度测量――这是油漆和其他涂层质量控制检查的关键。

However, the increase in the photoactive layer thickness has resulted in lower efficiency levels, which therefore brings much complex manufacturing process.
然而，光活性层厚度的增加导致效率水平降低，因此带来了复杂的制造工艺。

Overburden Additional natural(geological) barrier, e.g. overlaying clay layer with sufficient thickness and suitable properties.
额外的天然（地质）屏蔽，例如覆盖在上面的厚度和性质合适的粘土层.