What is the translation of " SINTERING " in Chinese?

• 烧结
• 得烧结

Examples of using Sintering in English and their translations into Chinese

Sintering Plant.
烧智工厂.

A reduction in waste at the slurry deposit No.2 of the sintering plant by 13,750 tonnes per year.
烧结厂2号矿床废料每年将减少13,750吨。

High sintering density makes product performance similar to forging material.
高烧结密度使得产品性能与锻造材料相似。

The use of the world's advanced low-pressure sintering preparation technology for standardized production.
采用世界先进的低压烧结制备技术进行标准化生产。

Sintering of high strength cemented carbides and special oxides is also a part of heat treatment.
高强度硬质合金和特殊氧化物的烧结也是热处理的一部分。

Furthermore, an electrolyzer requires four different types of ceramics, making the sintering a challenge.
此外，电解槽需要四种不同类型的陶瓷，这使得烧结成为挑战。

So, the sintering that performed just using temperature is generally called"pressureless sintering".
因此，仅使用温度进行的烧结通常称为“无压烧结”。

The temperature at which the silver paste is sintered is generally controlled at 150° C and the sintering time is 2 hours.
银胶烧结的温度一般控制在150℃，烧结时间2小时。

Producing a tank using a laser sintering printer would require an unrealistic amount of metal powder and would be very slow.
使用激光烧结打印机生产罐需要不切实际的金属粉末量，而且速度非常慢。

Professor Hopkinson is the original inventor of the transformational high speed sintering technology.
Hopkinson教授是创新性高速烧结（HSS，HighSpeedSintering）技术的最初发明人。

At high temperature(in most copper-based carcass sintering temperature above 800℃) strength increases with increasing temperature.
在高温下（在多数铜基胎体烧结温度800℃以上）强度随温度升高而增大.

Example 1" Claims of the patent application for the production of a silicon nitride ceramic, sintering time of 1-10 hours.
例1】专利申请的权利要求为一种氮化硅陶瓷的生产方法，其烧成时间为1~10小时。

Selective Laser Sintering is advantageous in that it can support a wide range of materials, including plastics, glass, and some metals.
选择性激光烧结是有利的，它可以支持广泛的材料，包括塑料，玻璃，和一些金属。

According to the working intensity and time, the switching power supply is switched, the pressure is changed, and the sintering is good.
根据工作强度和时间，开关电源切换，压力变化，烧结好。

Its production technology and equipment is relatively simple, mature, free sintering, product performance and stability, market demand.
其生产工艺和设备比较简单、成熟，免烧结，产品性能稳定，市场需求量大。

Consolidating the work piece into a solid steel part occurs during the next stage of manufacture: thermal treatment- better known as sintering.
强化工件变成固化钢制品则发生在生产的下一个阶段:热处理--俗称烧结。

The optimum sintering temperature is also related to the bearing capacity of thermal equipment, and energy saving should be considered at the same time.
最佳烧成温度还与热工设备的承受能力有关，同时要考虑节能。

Metal powder fabrication: Another experiment being transported on this flight will allow astronauts to study a process known as liquid-phase sintering.
金属粉末制造：在这次飞行中运输的另一个实验将允许宇航员研究被称为液相烧结的过程。

The shrinkage ratio of sintering process is about 50%, so the size of the Blade Series after sintering is only half of the former.
烧结过程中的收缩率约为50％，因此烧结后CNC刀片的尺寸仅为前一个的一半。

Some ceramic raw materials have a lower affinity for water and a lower plasticity index than clay, requiring organic additives in the stages before sintering.
一些陶瓷原料对水的亲和力较低，塑性指数低于粘土，在烧结前的阶段需要有机添加剂。

Apart from the SLA process, the onset of selective laser sintering(SLS) in 2006 paved way for mass and on-demand production of industrial parts.
除SLA工艺外，2006年选择性激光烧结（SLS）的开始为工业零件的大规模和按需生产铺平了道路。

Sintering affects the resistivity and slope of the resistance temperature curves as well as the stability by closing the pores between different oxide particles.
烧结也影响电阻率和电阻温度曲线的斜率以及稳定性通过关闭不同的氧化物颗粒之间的孔隙。

PT Scientist Karsten Becker's research has found microwave sintering might be a way of 3D printing regolith to construct off world habitations.
PT科学家KarstenBecker的研究发现，微波烧结可能是一种以3D打印方式构建世界栖息地的方式。

Some of the different types of physical transformations which are used in 3D printing include melt extrusion, light polymerization, continuous liquid interface production and sintering.
在3D打印中使用的一些不同类型的物理转化包括熔融挤出，光聚合，连续液体界面生产和烧结。

The Selective Laser Sintering(SLS) technology is the most common among powder-based 3D printing technologies, although several derived processes exist.
选择性激光烧结(SLS)技术是最常见的基于粉末的3D打印技术，虽然存在几个衍生过程。

However, not all 3D printing technologies, such as selective laser sintering(SLS) and stereolithography(SLA), are able to print directly in color.
然而，并非所有3D打印技术（例如选择性激光烧结（SLS）和立体光刻（SLA））都能够直接以彩色打….

Transform the original large sintering and converter blowers, improve product efficiency and technical level, improve the structure, simplify the manufacturing process, and reduce costs.
改造原有大型烧结和转炉鼓风机,提高产品效率和技术水平,在结构上加以改进,简化制造工艺,降低成本。

Combustion products- nitrides and aluminum oxides- are specifically prepared for sintering branched surfaces with transition nanolayers formed between the particles.”.
燃烧产物：氮化物和氧化铝，专门用于烧结分支表面，在颗粒之间形成过渡纳米层。

Relatively high densities and good dielectric properties were obtained, especially when considering that no sintering and only pressure from the extrusion was employed.
获得了相对高的密度和良好的介电性能，特别是当考虑不使用烧结和仅来自挤出的压力时。

Dr. Ingo Ederer, chief executive officer of voxeljet, commented:“Our new high speed sintering process will initially be launched on our VX200 platform.
Voxeljet首席执行官IngoEderer博士评论道：“我们的新型高速烧结工艺将首先在VX200平台上推出。