What is the translation of " SINTERING PROCESS " in Chinese?

• 烧结过程
• 烧结工艺

Examples of using Sintering process in English and their translations into Chinese

(3) to improve milling, molding and sintering process;
改善制粉、成型和烧结工艺；.

Sintering process depends on the requirements of product use.
烧结工艺取决于对产品的使用要求。

This has important implications for the sintering process of iron phosphate.
这对磷酸铁的烧结工艺有重要的意义。

One of the more unusual challenges is that ceramic shrinks by about a third during the sintering process.
另一挑战在于陶瓷会在烧结过程中缩小约三分之一。

After the sintering process, no secondary operations are required to improve tolerance or surface finish.
在烧结过程之后，不需要二次操作来改善公差或表面光洁度。

Professor Pan's technique helps to minimise errors during the sintering process.
潘教授的技术则可帮助减少烧结过程的错误。

In order to meet the ultra-low emission standards of the sintering process, a steel mill has invested equivalent to US$47 million.
为了达到烧结工艺的超低排放标准，邯郸一家钢厂已投资了相当于4700万美元。

Thus, the analyzed systems can be used in the combined laser sintering process.
因此，分析的系统可用于组合的激光烧结过程。

The shrinkage ratio of sintering process is about 50%, so the size of the Blade Series after sintering is only half of the former.
烧结工艺中的收缩比例约为50%，因此烧结后刀片的大小仅为之前的一半。

Most of the 3D printed clothing is printed using the selective laser sintering process.
大多数3D打印衣服都是使用选择性激光烧结工艺进行打印的。

The shrinkage ratio of sintering process is about 50%, so the size of the Blade Series after sintering is only half of the former.
烧结过程中的收缩率约为50％，因此烧结后CNC刀片的尺寸仅为前一个的一半。

EOS provides plastic materials that are perfectly matched to laser sintering process parameters and systems.
EOS可提供完美适应于激光烧结工艺参数和系统的塑料材料。

The sintering process is rigidly controlled within the diamond stable region and an extremely hard and abrasion-resistant structure is produced.
烧结过程在金刚石稳定区内被严格地控制，于是生产出一种极硬且耐磨的结构。

Even more, it does this with a specialty support material that is completely burned out during the sintering process.
更进一步的是，它采用一种特殊的支撑材料，在烧结过程中它能完全被烧掉。

In the actual sintering process, in order to form a completely dense material, metal binder to become liquid(called liquid phase sintering)..
在实际烧结过程中，为了形成一种完全密实的材料，金属结合剂要变成液态（称为液相烧结）。

Also, dioxins and furans(PCCDs and PCDDs) were produced in the electric arc furnace process as well as in the sintering process.
此外，二恶英和呋喃(PCCDsandPCDDs)是在电弧炉以及在烧结过程中产生的。

Dr. Ingo Ederer, chief executive officer of voxeljet, commented:“Our new high speed sintering process will initially be launched on our VX200 platform.
Voxeljet首席执行官IngoEderer博士评论道：“我们的新型高速烧结工艺将首先在VX200平台上推出。

During the forming process, laser parameters, powder properties, and sintering atmosphere are important factors affecting the quality of the sintering process..
在成形过程中，激光参数以及粉末的特性和烧结气氛是影响烧结成形质量的重要因素。

Selecting a suitable atmosphere for sintering different materials can help the sintering process, improve the degree of product densification, and obtain products with good performance.
在合适的气氛中选择不同的材料进行烧结，这有助于烧结过程，提高产品的致密度，并获得具有良好性能的产品。

On contrary to traditional metallurgical processes that solidify melted metals, powder metallurgy starts with metallic powders that are solidified, thanks to a sintering process.
与传统的熔炼金属固化的冶金工艺相反，粉末冶金技术始于固化的金属粉末，这归功于烧结工艺。

These metal use the DMLS(Direct Metal Laser Sintering) or SLM process for printing.
这些金属使用DLS(直接金属激光烧结)或SLM工艺进行印刷。

The process of SPS sintering can be regarded as the result of particle discharge, conductive heating and pressure synthesis.
SPS烧结过程可以看作是颗粒放电、导电加热和加压综合作用的结果。

The mud buffer storage device that is sent to the site can directly send the sintering and mixing process using the tanker or the pipeline.
送到现场的泥浆缓冲储存设备可以通过罐车或管道直接送到烧结和混合过程。

Metal powder fabrication: Another experiment being transported on this flight will allow astronauts to study a process known as liquid-phase sintering.
金属粉末制造：在这次飞行中运输的另一个实验将允许宇航员研究被称为液相烧结的过程。

General process for the system blank- sintering- the cooling of three steps.
一般工艺过程为制坯-烧结-冷却三个步骤。

WayKen stereolithography(SLA) is a UV based curing process, and selective laser sintering(SLS) uses a carbon dioxide laser.
WayKen立体光刻(SLA)是一种UV光固化工艺，而选择性激光烧结(SLS)则使用二氧化碳激光。

Ultrasint PA6 LM X085 is a new material for use in selective laser sintering(SLS) processes.
P6LMX085是一种新型材料，用于选择性激光烧结(SLS)工艺。

Ultrasint PA6 LM X085 is a new material made to be used in selective laser sintering(SLS) processes.
UltrasintPA6LMX085是一种新型材料，用于选择性激光烧结(SLS)工艺。

The necessary heat transfer process for sintering with normal method is negligible in SPS process..
用通常方法烧结时所必需的传热过程在SPS过程中可以忽略不计。