Examples of using Ceiling surface in English and their translations into Croatian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
The ceiling surface will be flat.
Humidification of the ceiling surface.
If the ceiling surface is flat, take a measuring tape and a marker.
Install the chandelier to the ceiling surface;
Apply it on the ceiling surface should be brush.
People also translate
Oakum for sealing cracks in the ceiling surface.
Humidification of the ceiling surface can be carried out in several ways.
It takes only 0.29 props/ m2 ceiling surface.
Ceiling surface should be carefully prepared: remove the old finish to renovate.
It can be found on the ceiling surface, various accessories.
Using a plumb line, this line is projected onto the ceiling surface.
Happy crystals are visible on the ceiling surface, but looked very nice, playing glare of the sun.
Then the tile is placed in place and pressed against the ceiling surface.
Before painting, made afterpreparatory work, the ceiling surface should be primed with diluted paint.
Alignment- an important stage of preparation for whitewashing the ceiling surface.
This is especially true of the ceiling surface, as its light color enhances the electric lighting.
This step allows you to achieve good adhesionputty to the ceiling surface.
Garland can decorate the ceiling surface, distributing it along tight and reinforced in advance the threads.
Securely welded to the plate hook and fixed to the ceiling surface.
Selecting the material for painting the ceiling surface, pay close attention to the color with a glossy finish.
The glued ceiling hides the cracks andsmall flaws of the ceiling surface well.
Its only drawback- that will have a ceiling surface to align almost perfectly with the help of plaster and putty.
To get the right light,you need to organize an oval niche on the ceiling surface.
The ceiling surface can have longlines, geometric patterns from plasterboard, projecting lines of delimitation.
Then secure the tiles on the ceiling surface with screws.
Satin stretch ceilings- this is a new stylish material that effectively covers the ceiling surface.
To the ceiling surface, vertical slats or boards should be nailed with a length of at least seven centimeters.
For cold-type roof settling it directly to the ceiling surface with its outer part.
On the ceiling surface is applied a layer of putty, armiruya joints sheets of drywall fiberglass tape, and then grind.
Since the room environment is quite aggressive, the ceiling surface must be resistant to temperature changes and neutral to moisture.