Examples of using This function can in English and their translations into Czech
{-}
-
Colloquial
-
Official
This function can be used any time without.
If your original remote uses one/two digit input switching(-/-- symbol), this function can be obtained by pressing the-/-- key.
This function can be used to preheat foods.
If your original remote uses one/two digit input switching(-/-- symbol), this function can be obtained by pressing the-/-- key, which is the same as the 10 key.
This function can be deactivated in the browser at any time.
Quick cool function This function can be used for food placed in the fridge compartment and desired to be cooled down rapidly.
This function can be useful during the product cleaning operations.
Snooze function This function can be used to stop the alarm temporarily for about 9 minutes once the alarm is activated.
This function can be cancelled by pressing button A.
This function can be activated independently for each hotplate.
This function can be used for steaming hanging clothes.
This function can be cancelled with the SNOOZE key 6.
This function can be used any time and does not affect any setting.
This function can be executed without finishing the outdoor installation.
This function can also be used when you hold the iron in vertical position.
This function can be used any time and is not affect any setting.
This function can be cancelled with the SNOOZE/ LIGHT key top.
This function can be used to set the date and time of the real time clock.
This function can operate on 4 levels, selected for given food.
This function can then be toggled to repeat every day or a certain day.
This function can be used for deleting reservations for each day of the week.
This function can only be used in conjunction with an optionally available LWP app!
This function can switch on again devices that have already been switched off depending on the device.
This function can be used for food placed in the fridge compartment and required to be cooled down rapidly.
This function can be used to put a network provider's prefix(which is stored in the speed dial list) in front of the telephone number"linking.
This function can be manually deactivated again, otherwise the control system will automatically reset this function to normal mode after 30 seconds.
This function can optimize to adjust the output sound quality automatically according to the input signal in order to get steady and nice sound output.