Examples of using Temperature value in English and their translations into Dutch
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
We can get a temperature value by executing.
Temperature value automatically detect and stop the alarm;
Digital display of current air humidity and temperature value.
Temperature values are required for calculating the U-value.
Digital display of the current humidity and temperature values.
Temperature values are required for calculating the U-value.
Coolant pressure and its average temperature value of the heating system;
Four temperature values are then sent to the serial port.
New: Output of the current light and temperature value as an analog voltage.
Temperature values outside limits. Contact your Internorm partner 103.
The test software can display temperature values and temperature profiles;
This energy is collected through the lens and converted to a temperature value.
Display of the temperature values and alarm situation on the display.
That is a total of 19200 measurement pixels, each of which contains a temperature value.
Distance and temperature values are reset to the actual value. .
additional cyclical value without temperature value.
We can pre-set two temperature values or leave you to adjust it.
Temperature values and temperature difference directly visible in display.
Output of the current light and temperature value as analog voltage Low noise Reed relay.
The temperature values of all climate chambers are measured according to related standard.
Equipped with battery that maintains temperature values and an anti-freeze function.
The temperature values will be calculated through common conversion of the base measurement.
Example 2 with distance value and temperature value without additional cyclic value. .
Desired temperature value adjustable from -20° C to +60° C. Adjustable cycle
All important operating parameters and temperature values are neatly displayed on the touchscreen.
can withstand the temperature value.
Remarks: It is absolute temperature value actually tested with thermal sensor.
The following screenshot from Loxone Config illustrates the displaying of a temperature value from the EIB Weather Station.
You will see the temperature value in celsius as the value
When using the profile-specific GSD file, the PA-OUT value as well as the temperature value are transmitted to the PLC see block diagram.