Read the bath temperature value on the calibrated thermometer and and set it. Example.
Lea elvalor de la temperaturade baño en el termómetro calibrado, redondéelo y ajústelo. Ejemplo.
Each time you press the button, the temperature value increases by 1 C.
Cada vez que pulse el botón elvalor de la temperatura aumentará 1 C.
The temperature value might be a little bit higher if multiple measurements being taken continuously.
Elvalor de la temperatura podría ser algo mayor si se realizan múltiples mediciones seguidas.
This energy is collected through the lens and converted to a temperature value.
Esta energía se recoge a través de las lentes y se convierte a un valor de temperatura.
Read the bath temperature value on the calibrated thermometer and round it up or down and set it. Example.
Lea elvalor de la temperaturade baño en el termómetro calibrado, redondéelo y ajústelo. Ejemplo.
The thermometer then converts it into a temperature value shown on LCD.
Luego el termómetro lo convierte en un valor de la temperatura demostrado en la pantalla.
The temperature value is shown on the user control panel and radio control handle display.
Elvalor de la temperatura existente aparece en las pantallas de la botonera del radiocomando y del panel del usuario.
Press and hold S4 button for around 3 seconds, the temperature value will blink.
Mantenga pulsado el botón S4 durante 3 segundos. Elvalor de la temperatura parpadeará.
Temperature indicator light When a temperature value is selected, the corresponding indicator light will illuminate.
Pilotos de temperatura Seleccionando un valor de temperatura, el piloto correspondiente se iluminará.
WHITE BALANCE can be set individually at 6500 or 9300 for the colour temperature value.
WHITE BALANCE puede ser ajustado individualmente en 6500 ó 9300 para el valor de temperaturade color.
The temperature value will reappear as soon as the measured temperature is within the allowable range.
El valor de temperatura volverá a aparecer en cuanto la temperatura medida se encuentre dentro del rango admisible.
Hold down A for at least two seconds until the temperature value disappears from the display.
Mantenga presionado A durante al menos dos segundos hasta que el valor de temperatura desaparezca de la pantalla.
If the measured temperature value is out of measuring range, the temperature value will be shown as“---”.
Si el valor de temperatura medido está fuera del rango de medición, el valor de temperatura se mostrará como“---“.
The second line in the display indicates“on”,“OFF” or the temperature value you programmed.
En la pantalla aparece“ON“,“OFF” o bien el valor de temperatura del aire programado en la segunda línea de la pantalla.
Press D to move the fl ashing between the temperature value and barometric pressure value, to select the one you want to calibrate.
Presione D y mueva el destello entre los valores de temperatura y de presión barométrica para seleccionar el valor que desea calibrar.
Use the buttons to select the minimum and maximum temperature,then use the buttons to set the temperature value.
Utilice los botones para seleccionar la temperatura máxima ymínima y los botones para introducir los valores de temperatura.
After 2 seconds the message‘Linked' disappears and the temperature value is shown on the display. Fig. 17.
Después de 2 segundos, el mensaje“Linked”(Conectado) desaparece y el valor de temperatura aparece en la pantalla. fig. 17.
The instrument sensor records the thermal radiation that is emitted or reflected by the object, or passes through the object, andconverts this information into a temperature value.
El sensor del aparato registra la radiación térmica que deja pasar, la detectada y la reflexionada sobre el objeto ytransforma esta información en valores de temperatura.
Press and hold for 2 seconds to clear the Max/Min temperature value when the Max/Min temperature is displayed.
Manténgalo presionado durante 2 segundos para borrar el valor de temperatura Máx/Mín cuando se muestre la temperatura Máx/Mín.
Results: 106,
Time: 0.0455
How to use "temperature value" in an English sentence
Q:What does the temperature value mean?
Temperature value (in relative value). ‘FSt’).
The temperature value received for the optics.
But the temperature value was always default.
You can read temperature value any side.
SUCCESS The temperature value has been returned.
Read the temperature value from a thermistor.
Include internal temperature value in recordings' metadata.
Español
Dansk
Deutsch
Français
हिंदी
Italiano
Nederlands
Português
Русский
Tagalog
عربى
Български
বাংলা
Český
Ελληνικά
Suomi
עִברִית
Hrvatski
Magyar
Bahasa indonesia
日本語
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Norsk
Polski
Română
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Turkce
Українська
اردو
Tiếng việt
中文