Examples of using Temperature value in English and their translations into Russian
{-}
-
Official
-
Colloquial
Sets the desired colour temperature value.
Temperature value automatically detect and stop the alarm;
Standard Voltage temperature Value 0- 1000.
For instance, pressure transmitters also provide temperature values.
Specify minimal and maximal temperature values in the GPI config dialog window.
The script automatically displays С after the temperature value.
Now you don't need to remember temperature values each time when you cook a new dish.
A separate memory button memorises the last nine temperature values.
When a temperature value is selected, the corresponding indicator light will illuminate.
The bright MULTI-DISPLAY(LED) indicating up to 6 temperature values is visible from across the lab.
The temperature value may be set within 5 seconds by means of the“+” and“-” buttons.
The bright MULTI-DISPLAY(LED) indicating up to 6 temperature values is visible from across the lab.
A temperature value can be set for all cooking modes between 60 C and Max, except for.
After 2 seconds the message‘Linked' disappears and the temperature value is shown on the display. Fig. 17.
The temperature value will reappear as soon as the measured temperature is within the allowable range.
Electronic temperature:"Failure" is output when the temperature values fall outside of the permissible range.
This‘target' temperature value will be displayed flashing for 5 seconds before returning to the current room temperature value. .
Standard setting with distance value, temperature value and additional cyclical value.
The instrument sensor records the thermal radiation that is emitted or reflected by the object, or passes through the object, andconverts this information into a temperature value.
In Tables 2.2 and 2.3, temperature values above the 95th or below the 5th percentile(respectively, warm and cold extremes) are highlighted in bold type and bright color.
When using the profile-specific GSD file,the PA-OUT value as well as the temperature value are transmitted to the PLC see block diagram"Cyclical data traffic.
A temperature value can be set for all cooking modes between 50 C and MAX, except for the GRILL programme, for which only the MAX power level is recommended.
Can provide initial distillation point temperature and final distillation point temperature value, also can provide temperature and flow rate at percent point.
After setting the countdown time in the power or temperature selection modes,you can press the“Power” or“Temp” button respectively in order to show the temperature value on the display.
When a number of cooking zones are switched on andthere is a desire to increase the temperature value, the cook top may not accept the increase and will emit an acoustic sound.
Area F will visualise the temperature value selectable on the basis of the set programme; if the temperature of the programme cannot be set, the area will show the symbol“--” dimly lit.
The set time value will be stored and in 3 seconds the system will automatically return to indicating the temperature value, at that indicator«» will be illuminated on the control panel.
The final room temperature value for the control can be set as the minimum, maximum or average of both sensors see the List of Data Points- Temperature Measuring Point Selection.
