Examples of using Bottom edge in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Open the bottom edge flaps.
Number of falls on each bottom edge.
To bend bottom edge to the left bend.
Etching on paper, 78x54 mm, signed on bottom edge"mp.
Process bottom edge of a lightning.
People also translate
Lithograph on paper, 374x438 mm, marked on bottom edge"H.
From bottom edge of mower to ground.
Keystone Adjustment to the size of the top and bottom edge.
In the bottom edge of the jacket is downloading.
Now measure from the length from the top to the bottom edge.
Cut the bottom edge, leaving a 1.5 cm seam allowance on.
Get the yellow square out through the bottom edge.
Bottom edge is at the correct distance from the worktop see illustration.
Spot of moisture to bottom edge of first few pages of the volume.
Lithographs on paper, 290x230 mm, signed by bottom edge"Jiří Slíva.
Then fold over the bottom edge of the leaf to cover the filling.
Lithograph on paper, 402x485 mm, marked on bottom edge"Josef Mánes.
The bottom edge of the phone is not shown in the picture.
Scoring unit(saves saw blades) 4SB for bottom edge trimming.
Inserting: On the bottom edge of the main unit there is a locking lug.
The template can be aligned either on the bottom edge or centred.
The bottom edge of the back cover will click open from the handset.
Minimum distance between electric hob and bottom edge of extractor hood.
Fold the bottom edge of the cloth, connecting them with top edges. .
Bind off for buttonholes when piece measures measured from bottom edge of body.
To remove the grille assembly, pull out on the bottom edge of the grille and tilt the grille frame forward.
With the bottom edge of the bracket on the horizontal line(6) with the arrow pointing toward the ceiling.
Processing range can provide semi-finished products processing, woven bag on roll, the bottom edge, edge, upper and lower note printing edge. .
Place the sides(1, 2) and the bottom edge(3) of the new filter properly behind the ridges of the holder fig. 17.