Examples of using Breaking force in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
High breaking forces despite its extremely low weight.
The core consists of Vectran® fibers ensuring high breaking force and low stretch.
Extremely high breaking force of 11mm in figure eight hitch.
With an immediate impacthazard automatic braking is done with the breaking force increasing in stages.
Above-average breaking forces in combination with devices.
In the strongest variant thebreaking strength of the chain(AUMUND type AU19) is up to a breaking force of 2400 kN.
High breaking force, minimal slip, perfect spooling behavior.
The three braided nylon cores provide for higher breaking forces, especially when combined with various devices.
The breaking force under which the helix cable will fail. Unit: N.
In the event of an immediate risk of impact,automatic braking is carried out with the breaking force increasing in stages.
High bead breaking force Thanks to its considerable….
Description This highly static rope is certified toEN 1891 A and features particularly low stretch and high breaking forces.
The breaking force determined in a test according to a prescribed procedure.
The VS 8-6 CP is similar to the VS 8-2 but additionally swaged,which achieves a particularly uniform surface and very high breaking forces.
For highest demands on breaking force, elongation and number of trips, also under difficult installation conditions.
Sirius 300 XG excels with an excellent price/performance ratio at very good friction values,good breaking forces and low stretch.
While reaching the breaking force, the riveting mandrel snaps at the predetermined breaking point and can simply be disposed of.
In addition to the greater metal cross section and the resulting higher breaking force, compacted ropes also have smoother strand and rope surfaces.
The breaking force(BC) in the conditioned state and the force(BM) required to produce an elongation of 5% in the wet state are.
The EXECUTION D6 high performance steel wire ropemeets these expectations at drilling rigs where the breaking forces of non-compacted ropes are sufficient.
High breaking force, low slip and perfect spooling behavior make the Sirius 300 XG a very good choice for all winch applications, no matter if spill or drum type.
Of the weight of comparable steel wire ropes Maximum breaking force- comparable with the breaking force of a steel wire rope of the same diameter.
The thermally pre-stretched vehicle winch rope HyperTEN consists of UHMWPE fibers andoffers maximum breaking forces and an extremely long service life.
Rated force Fnom kN> 2 kN Accuracy and stability Relative linearity error2 dlin x%Fnom± 1 Relative reversibility error v x%Fnom< 0.1 Relative creep- x%Fnom 0.05 Temperature effect on zero signal TK0 %/10 K 0.2 Temperature effect on characteristic value TKC %/10 K 0.2 Mechanical characteristicsForce limit FL x%Fnom 150 Breaking force FB x%Fnom 300.
The cost-efficient solution to achieve the purpose-optimized combination of torsional stability, high breaking force and long service life is the hoist rope PERFECTION TK15.
Symbol Unit Model series F3301 F33S1 Measurement range Rated force Fnom kN> 2 kN Accuracy and stability Relative linearity error1 dlin x%Fnom± 1 Relative reversibility error v x%Fnom< 0.1 Relative creep- x%Fnom 0.05 Temperature effect on zero signal TK0 %/10 K 0.2 Temperature effect on characteristic value TKC %/10 K 0.2 Mechanical characteristicsForce limit FL x%Fnom 150 Breaking force FB x%Fnom 300.
Reliability and safe operation of the system ensured by reducing the specific load through the high breaking forces achieved by SUPERFILL® compaction technology.
Sirius 300 XG offers an excellent price/performance ratio at very good friction values,good breaking forces, low stretch and a long service life.
Fb: Break force- the force at contact break. .
Reliable system wraparound straps break forces after instep feet.