Examples of using Input section in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
The input section tag is.
Settings for the Mixer Input Section.
One or more input sections are allowed.
Input section B was an optional expansion.
Check the line up to the input section and the remote control receiver.
In the Formula Helper dialog box, click the button in the Arguments Input section.
The input section supports the following tags.
NEXUS parameters such as subsonic filters or microphone input gain can be controlled in the Input section.
The input section of the SbA760 also allows mono sub operation.
In the spring programs the"Quick Ouput" is displayed and in the shaft programs the shaft is displayed after each input section is completed.
The input section makes it easy to adapt this amplifier to most system configurations.
Input section has a standard length 10D in which the pipes are machined to meet the parameters requirements of ISO 5167.
To apply the effect that's selected here to the microphone input, use the FX2 SEND Knob in input Section to set the intensity of the effect.
In the Language and Input section, set the language for the device, the input, the keyboard and spellchecking.
Connect an optical cable(not provided with your system)from your device's optical or digital audio output to the same input section on the Bose console where the device's video cables are connected.
It should first be noted that the entire digital input section and the sophisticated processor architecture of that part of the circuit, which is responsible for the digital-to-analog conversion, are galvanically isolated.
AMPLIFIER SETTINGS Signal Input and Output Configurations The input section of the amplifier consists of a phase switch that sets the output configuration, gain controls, and RCA inputs. .
Drag and plug a Stair Alignment component(located inside the Input section, under the Params tab in Grasshopper) and do right click on it to select one of the three options: left, center or right.
Then, scroll to the Inputs section and fill in the data of your simulation scenario.