Examples of using Installation surface in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Stick the base to the installation surface.
The installation surface should be clean and flat.
Remove oil and other dirt from the installation surface.
The installation surface must be clean, dry and level.
Remove oil and other dirt from the installation surface.
Installation surface 2900 x 1300 mm, without saw blade.
Adjust the camera stand so that there is no space between it and the installation surface.
Make sure the installation surface is flat and clean.
If you have a pet at home, the detector should be installed parallel with the installation surface and meet the following requirements.
What should the installation surface for the whirlpool tub look like?
No insulating bush is required. The dielectric strength issolely determined by the insulating washer between the transistor and the installation surface.
The installation surface must be level and sufficiently sturdy.
The vast majority of models of led panels are installed on roofs removable,but they also have accessories to perform the installation surface or pendant.
The height of the installation surface above the fl oor is at least 850 mm.
Highlights The removal of parts from a pit often requires special base designs,since different floor levels serve as installation surfaces.
The installation surface, however, should not have a slope, depression or bumps.
Be careful with uneven installation surfaces: Carefully push the dishwasher with feet unscrewed under the worktop.
Installation surface The device must be placed on a level, fl at, and sturdy surface. .
With a weight of more than 80 tons, and an installation surface of about 140 square metres, distributed over three so-called“skids”, for AERZEN and Emmerthaler Apparatebau GmbH this order represented a new dimension.
The installation surface must be suitable to accept the accompanying screws and provide a fi rm support.
Installation surfaces, which lets you install the cooking surface into different types of kitchen worktops.
If the installation surface on the roll forming system is limited, the TruFlow CO2 laser can be placed on a separate sub-frame.
If the installation surface is waterproof and insulated, it should be padded 2.5~3 cm thick under the front and rear seats to prevent crushing.
The installation surface is a flat and vertical non-combustible wall, capable of supporting the operation weight of the unit see"Technical specifications" on page 38.
Clean the installation surface, evenly apply the heat-conducting silicone grease to the bottom of the LED module, and fix the LED module and radiator with screws.
Our Mida brand stands for excellent and efficient cleaning anddisinfection of installations, surfaces, instruments and hands.