Examples of using Material must in English and their translations into German
{-}
-
Medicine
-
Colloquial
-
Official
-
Ecclesiastic
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
The material must not“swim”.
You need to be foresightedly and your material must be well adapted.
This material must be left in the surf school before 6:00 p.m.
Depending on the design principle of the batteries, the material must also be flame-retardant.
The material must not get hot or you achieve the contrary.
For use in outdoor applications, the material must therefore be adequately stabilised.
The material must fulfil the fire protection regulations B1 according to the DIN 4102 standard.
As many as five layers of this finely grained material must be applied with a goose quill.
Very dry Top Material must be dried out to avoid it wrapping around the"V" cutter.
The containers must be stored in a well-ventilated place and the material must not penetrate the soil.
The material must not become overstressed or overheated to prevent microcracks from forming.
The distance between the top of the convection air outlet and roof of inflammable material must be at least 500 mm.
Contaminated material must be disposed of as radioactive waste via an authorised route.
In order for this bonding/shearing to occur, the friction material must first be displaced onto the surface of the rotor.
Material must be conveyed from external and internal warehouses on the plant premises to the place where it will be used.
On the date of filing, at the latest, the deposited biological material must be withdrawn irrevocably from the depositor's sphere of influence.
The material must not be flammable under any circumstances in order to prevent the building from being damaged in an accident.
A good glass cup, first of all from the material must be environmentally friendly and non-toxic, the entrance of things safety is the most important;
The material must not be heated above 250 C, as otherwise the sheet or plate can lose its outstanding properties.
Yet, beyond this fundamental requirement, the material must be able to endure severe cycling of these loads, as experienced in normal usage.
Material must be dried in the oven, weighed, and then, put any neemalirovannuyu ware unglazed clay pot, aluminum cans, etc.
Any downloaded and/or copied material must include all copyright and other proprietary notices as displayed on the Dornier site.
The material must be correlated to the cultural context of the country. For example, it is fundamental to notice and consider the differences in electrical installations.
In case of return authorization, the material must be sent with the original packaging complete of the copy of the invoice.
The material must not be cut, because the required component can be easily broken by the scratching of the plate.
Before put into production, all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.
However, the material must always be dry, and if suddenly he spilled something, you should wipe off the liquid immediately.
The material must be low-linting, the design must, fit appropriately, and the risk of collecting particles on the surface of the garment must be minimized.
If compacting is specified, the material must be compactable and the cover height must be at least three times the size of the largest grain in the backfill material. .
The suit material must be lint-poor and the suit Design is the tightness of the clothes to consider as well as the danger of accumulating of particles on the surface to reduce.