Examples of using Recrystallization in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
The latter can also be obtained by recrystallization from microcrystalline salts.
Before you make the final run-in of liner through rollers, it is subjected to annealing,and heated to a temperature at which the recrystallization of steel.
They are formed by melting and recrystallization on or within meteorite parent bodies;
Typical treatments are stress relieving, ageing, soft annealing, recrystallization, and recovery.
It has to be considered that recrystallization in small structures takes longer time than in larger ones.
In the process ofsintering, the grain interface is first formed, which leads to the recrystallization of the grains.
Austenite recrystallization may occur either during the process of deformation,(dynamic recrystallization) or after the deformation static recrystallization.
We are world leaders for systems and processes for casting andcoating of turbine blades and for recrystallization of ultraclean solar grade silicon.
Thyssenkrupp steel Usage hints 300dpi JPG Recrystallization annealing The cold-rolled steel strip is heated to up to 830° degrees Celsius for a short time in the annealing furnace in a continuous process.
Seven glass assemblies available for various uses, including distillation of foaming samples, recrystallization under reflux and height restrictions.
Recrystallization, Drying, Milling, Screening, Mixing and Packaging The mid-sized chemical service provider ProChem GmbH with its plants in Oberthal, Bensheim and Dieburg is continuing to grow.
The most common contaminants of shell samples for radiocarbon datingare those that are caused by isotopic exchange and recrystallization.
We can also provide professional cleaning, waterproofing, waxing, polishing,grinding, recrystallization and maintain an about marble, granite or travertine.
The installation takes as its theme the recrystallization of urban structure, using the example of Halle's major residential development, Silberhöhe, which was built between 1979 and 1989 in sight of the chemical combine Buna.
In addition, the cocoa oil grain will dissolve,penetrate to the surface of chocolate, recrystallization, lead to chocolate appear"anti frost" phenomenon.
Reply TZM alloy(titanium zirconium molybdenum) complete recrystallization two grain growth process, from long fibrous tissue becomes equiaxed grains, while TZM alloy greatly improved toughness, elongation, even up to 37.
Temperature variations should, as far as possible,be avoided as the resultant release of water vapor and recrystallization may result in agglomeration sticking together.
The model described growth phenomena of austenite grains during heating, recrystallization during and after hot deformation, and the transformation of austenite during controlled cooling.
It is used as a solvent for extracting fatty acids from animal and vegetable oils in theoil and fat industry and as a reaction medium for recrystallization of steroids in medicine.
The results showed that: wire annealed at 1750℃ for 30 minutes toform a long and large recrystallization, its tensile strength and bending performance is much better than the pure molybdenum, good room-temperature toughness.
Tests showed that pure molybdenum heating above 1100℃, the formation of equiaxed recrystallized structure, and yttrium molybdenum alloy was heated at 1750℃ after half an hour toform a long and large recrystallization;
Black tungsten wire products are featured with minimum formation at high temperatures,high recrystallization temperatures, uniformity in dimension and excellent coil ability.
Besides its rigid design, which allows rolling forces so far unattained in the market, the MEERdrive block is equipped with a single drive whichprovides the flexibility required to optimally control recrystallization after rolling.
The process is based on the mechanicalseparation of the metal content with downstream solvent and recrystallization of the salt components and subsequent washing of the aluminum oxide.
Hardening can be both a polymorphic transformation, also without polymorphic transformation. 3. holiday- This process, the essence of whichIt is heat-treated to tempered martensite or a metal alloy,in which the main processes are the disintegration of martensite, recrystallization and polygonization.
Because it might be possible that alanine was L and phenylalanine was D. It was reported in 2004 that excess racemic D, L-asparagine(Asn),which spontaneously forms crystals of either isomer during recrystallization, induces asymmetric resolution of a co-existing racemic amino acid such as arginine(Arg), aspartic acid(Asp), glutamine(Gln), histidine(His), leucine(Leu), methionine(Met), phenylalanine(Phe), serine(Ser), valine(Val), tyrosine(Tyr), and tryptophan Trp.
Microstructural evolution during plastic deformation of high-stacking fault-energy single-phased materials: a undeformed material, b formation of interior dislocations(immobile and dipoles) and wall dislocations, c advanced dynamic recovery and formation of substructure, d transformation of low-angle grain boundary into high-angle grain boundary,and e fully recrystallized microstructure by continuous dynamic recrystallization Ricardo Buzolin intermediate report, Module 2.
The lanthanated doped molybdenum rods are targeted for use in higher temperatureapplications where ductility is retained after recrystallization for material with smaller cross sections. Description Code.
If a metallic coating is to be applied in accordance with 5.6.3, or the surface is to be enamelled in accordance with 5.6.5, it shall be notedthat for treatment conditions HK 290 to HK 690 recovery or recrystallization caused by higher temperatures could have an effect on the mechanical properties of the product.
Is still in the development stage of wet adding potassium doped molybdenum, silicon, aluminum and other trace elements are formed by doping the reported high molybdenum best performance of a molybdenum alloy, the recrystallization temperature of up to 1800, even after recrystallization still has some strength, ductility and broad prospects for development.

