Examples of using Sequential read in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Up to 3.4GB/s sequential read speed.
Sequential read and write speeds of up to 112 MB/s.
The hard drive from themanufacturer Hitachi reads with 59 MB/s in the Sequential Read.
SSD speeds: sequential read and write speeds up to 560/540 MB/s.
Raid 10 of 10 disks issubstantially faster for 64K Random Reads than Sequential Reads!
Typical sequential read throughputs are between 65 and 85 MB/s read/write.
The Samsung 500GB drive achieved a very fast sequential read and write speed.
For Sequential reads and random writes, no significant differences were measured.
The transfer rate of 59.7 MB/s(HD Tune, Sequential Read) is below average for an HDD of this class.
The 480GB Crucial driveachieved in AHCI mode an enormously high sequential read performance.
Up to 2.6GB/s sequential read and 2.7GB/s sequential write performance.
The 860 EVO delivers class-leading performance in sequential read(540MB/s) and write(520MB/s) speeds.
The little subnotebookcan accomplish 6001 PCMark Vantage points with its i5-460M, an HD 5650 and a 5400 rpm HDD 75 MB/s sequential read.
The Crucial 500GB SSD achieved an enormously high sequential read and write speed in AHCI mode.
Other models are somewhat faster than the sequential read and write speeds of just over 90 MB/s and an access time of approximately 17 ms.
The 512GB Crucial driveachieved in AHCI mode an enormously high sequential read and write performance.
Toshiba Memory Corporation survey based on sequential read of 128KiB units and random read of 4KiB units under Toshiba Memory Corporation test conditions.
MacBook Pro includes a solid-state drive that's incredibly fast, with sequential read speeds up to 3.2GB/s.
Multiple fio jobs for direct I/O, even though using sequential read or write operations, can result in lower than expected throughput for st1 and sc1 volumes.
SSD's are hard disks without any moving parts and provide high performance,durability and reliability with up to 540 MB/s sequential read speed and 520 MB/s write speed.
In our tests, the hard drive achieved almost 120 MB/s in sequential reads and 115 MB/s in sequential writes, demonstrating the disk's good read and write speeds.
The design for ordinary harddisk on working time is 5* 8 hours of continuous working time, which means five working days, the hard disk work eight hours everyweekday,From this data, the ordinary hard disk is not suitable forlong sequential read and write, if long uninterrupted read it, isbound to be overwhelmed problems;
The burst speed for read and write processes is 600MB/s, for sequential read and write it reaches up to 515MB/s and 485MB/s respectively.
High storage instances provide very high storage density and high sequential read and write performance per instance.
The two Crucial m4 2.5â€3 128GB SATA3 SSD CT128M4SSD2 achieved with the at testing date most current firmware000F as RAID0 array a gigantic high sequential read and write performance, very low access times and in spite of the lower 4K values, the impression was clearly better than one single Crucial m4 128GB or Crucial m4 256GB in AHCI mode.
The 500 GBCrucial drive achieved an extremely high sequential read and write speed in AHCI mode.
The Samsung 128GB SSD achieved an relatively good sequential read and write speed in AHCI mode.
The Crucial 480GB SSD achieved an relatively good sequential read and write speed in AHCI mode.
Storage optimized instancesare designed for workloads that require high, sequential read and write access to very large data sets on local storage.
With the Active-Active Failover Feature Pack for Open-E DSS V7 you can double the performance of your storage system,increase sequential read and write performance by 100% and shorten switching time almost twice, compared to Active-Passive.