Examples of using Flashover in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
No breakdown or flashover.
Of FLASHOVER è offline">FLASHOVER.
Power frequency flashover Voltage.
Routine visual inspection,routine water pressure test and electrical flashover test.
UV spray production line on the flashover area, infrared Oven and UV curing furnace.
Routine visual inspection and electrical flashover test.
And make the best deal, Flashover processing has taken the method of a small decline, Pick up speed.
Low power frequency flashover Voltage.
This is the current(50 Hz)that the SPD is capable of interrupting by itself after flashover.
For 220V- 220KV Power cable of low resistance,high resistance leakage fault, flashover failure for rapid positioning and fixed point.
The specified value is increased by 10%, and there should be no breakdown,discharge or flashover.
Pressurization: there is no breakdown or flashover when pressurization≥3000V (DC)/1 min between the metal work piece of the cabinet and earth device.
There is no insulated breakdown or flashover phenomenon.
An arc flash is a flashover of electric current that leaves its intended path and travels through the air from one conductor to another, or to ground.
There is no inxulated breakdown or flashover phenominon.
Transformer Maintenance GuideDecember 13, 2017Check the cleanliness of the casing and magnetic road,and clean up in time to keep them clean and prevent flashover.
There is no contact,so there will be no loss caused by mechanical wear and flashover during connection and separation.
High voltage insulators are designed with a lower flashover voltage than puncture voltage, so they will flashover before they puncture, to avoid damage.
Check the cleanliness of the casing and magnetic road,and clean up in time to keep them clean and prevent flashover.
In order to prevent the busbar fault caused by the flashover of the pillar-type current transformer, the current transformers are usually stalled on the outlet of circuit breakers or the side of the transformers.
According to the electric voltage and current waveform change analysis,Iit can adjust flashover very accurately.
Flashover voltage is the voltage which causes the air around or along the surface of the insulator to break down and conduct, causing a'flashover' arc along the outside of the insulator.
Withstand voltage Between the grounding device and the box body, the withstand voltageis over 3000V/Min, no breakdown and flashover, U≥3000V(direct current).
A preliminary assessmentindicates that condensation from heavy rainfall caused a flashover on one of the facility's transformers", wrote a statement from the Las Vegas Visitor and Convention Authority, NV Energy and the Consumer Technology Association.
When an overvoltage accident occurs, the air gap is first worn out by the insulator string,and the arc is leaped from the air without causing the flashover of the insulator.
A preliminary assessmentindicates that condensation from heavy rainfall caused a flashover on one of the facility's transformers", the CTA, Las Vegas Visitor and Convention Authority and NV Energy- which provides electricity to the Las Vegas Convention Center- said in a joint statement.
And it can endure a 2000V and 50Hz AC voltage(virtual value) to the non-electrification metallic outside part or shell in 1 minute,and there is no insulated breakdown or flashover phenomenon.
Dielectric strength: between each electric circuit and exposed conducting parts, and between each independent circuit of the AC point,there shall be no sign of insulation breakdown and flashover when being tested under 2kV(50 Hz) AC test voltage with the duration of 1 min.
Mary Ann Cooper, a retired emergency physician and lightning researcher, told CNN May 25, 2017 that the majority ofelectricity from lightning strikes flows outside the body in a flashover effect.