Examples of using Software raid in English and their translations into Indonesian
{-}
-
Computer
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
Software RAID.
On Linux there is also the possibility to use software RAID.
Software RAID Drive.
You currently have%d software RAID partition(s) free to use.
Software RAID state.
Authentication is required to configure Linux Software RAID devices.
Linux Software RAID Array.
Hardware RAID configurations are significantly better than software RAID.
Create a software RAID partition.
Each of these terms in fact corresponds to a“real” partition(or a software RAID device).
No software RAID detected mdstat.
It's very rare to see in commercial applications, but is possible to do with software RAID.
Software RAID 1 solutions don't always allow a hot swap of a failed drive.
With today's faster CPUs, Software RAID outperforms Hardware RAID. .
Version 1 of GRUB(now known as“Grub Legacy”)couldn't handle all combinations of LVM and software RAID;
With present CPU speeds, software RAID can be faster than hardware RAID. .
Software RAID typically does not require a controller, since it doesn't use a dedicated RAID processor or a separate cache.
With today's faster CPUs, Software RAID also generally outperforms Hardware RAID. .
Based on the m0n0wall firewall, it lets users convert a PC to aNAS server by providing disk management and software RAID.
Maybe this will happen when the Software RAID extension to VeloSSD, MaxVeloSSD is ready and fast.
FakeRAID use a combination of hardware and software which results in the initial appearance of hardware RAID, but the actual performance of software RAID.
With faster CPUs, software RAID can perform as good as hardware RAID and even faster in some instances.
Although RAID 5 may be implemented in a disk controller, some have hardware support for parity calculations(hardware RAID cards with onboard processors)while some use the main system processor(a form of software RAID in vendor drivers for inexpensive controllers).
Many operating systems also provide software RAID support independently of the disk controller, such as Windows Dynamic Disks, Linux mdadm, or RAID-Z.
Software RAID allows you to combine several disks into a larger RAID device. A RAID device can be configured to provide additional speed and reliability compared to using an individual drive. For more information on using RAID devices please consult the kickstart documentation.
It is worth noting that the linux kernel's software raid driver called md allows for raid10 configurations with an odd amount of drives, i.e. a 3 or 5 disk raid10.
RAID-Z, the software RAID that is part of ZFS, offers single parity protection like RAID 5, but without the“write hole” vulnerability thanks to the copy-on-write architecture of ZFS.
The main disadvantage to RAID-Z is that it is still software raid(and suffers from the same minor latency incurred by the CPU calculating the write load instead of letting a hardware HBA offload it).
You must then choose“Configure software RAID” in the partitioning tool to combine these two partitions into a new virtual disk and select“Create MD device” in the configuration screen.
Generally speaking, if someone is going to choose software RAID, they should avoid FakeRAID and use the OS-native package for their system such as Dynamic Disks in Windows, mdadm/LVM in Linux, or ZFS in Solaris, FreeBSD, and other related distributions.