Examples of using Measuring time in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Measuring Time: 8 seconds.
Cooling time= Measuring time+ α.
Measuring time 0.5 second.
On average, the measuring time is 7.5 minutes.
Measuring time Within 1minute.
Color Testing Tristimulus Colorimeter 0.5 Second Measuring Time For Automobile.
Measuring Time About 1.5s.
The world's first LED digital watch started measuring time- made by Hamilton.
Measuring time Around 5 seconds.
World's first LED digital watch started measuring time- was made by Hamilton.
Measuring time About 0.5 seconds.
Using the sun and the moon for measuring time does not make one a worshipper of the moon!
Measuring time Fine mode: 1S;Tracking mode:0.5s.
Stainless Steel Floor Gloss Measurement Instruments,HG268 Tri Gloss Meter 0.1s Measuring Time.
Typical measuring time per sample.
Spiders have also played a central role in mapping the skies, measuring time and even fighting wars.
The measuring time of the gas analysis can be reduced by the user.
This measurement is done digitally, reducing operator influence considerably. Accuracy of up to 0.00002 or0.01% Brix can be reached, with small sample volume(0.5 to 1 mL) and short measuring time(a few seconds).
This measuring time is typically a few seconds. Back to Questions;
METTLER TOLEDO's wide range of benchtop and portable digital refractometers measure refractive index and other related values,such as, Brix, invert sugar, HFCS42 or HFCS55 or other concentrations with high precision and a short measuring time.
Measuring Time About 2.4s(Measure SCI& SCE about 5s).
The focus is on simplifying workflow with tools that empower customers, thereby dramatically reducing the on-site measuring time and lowering overall costs. Worldwide, approximately 15,000 customers are operating more than 30,000 installations of FARO's systems.
Measuring Time: About 2.4s(Measure SCI& SCE about 5s).
Principled Technologies report commissioned by Dell EMC,"Handle transaction workloads and data mart loads with better performance," June 2017, comparing a similarly configured Dell EMC Unity 400F array to HPE 3PAR 8400 array, measuring time to complete a data mart load.
Measuring Time About 2.4s(about 5s for testing SCI/SCE simultaneously).
The Timer for measuring time shall be with hour, minute and second, and the accuracy shall at least±1%.
This measuring time can typically range from a few seconds with a portable digital density meter without temperature control to about 2 to 5 minutes with a bench top instrument with active temperature control.
Due to the short measuring time, important process parameters for the monitoring and control are available almost immediately.
A9: The measuring time is unlimited(depends only on available disk space).
The estimated measuring time- along with the reliability and significance of the results- often plays an important role in almost any analytical question.
