Examples of using Access server in English and their translations into Russian
{-}
-
Official
-
Colloquial
Conversion of QUIK Access Server software to x64 architecture.
On January 7, 2009, Cloud Engines unveiled Pogoplug network access server.
Four remote access server clusters for 150 users.
On January 5, 2010, Iomega announced their iConnect network access server.
The network access server then forwards the EAP message to the remote access client.
People also translate
The recommended number of concurrent connections to one access server is up to 400.
For more information about specifying an access server type, see“Additional considerations” later in this topic.
When a connection is made, the remote access client negotiates the use of EAP with the network access server.
A network access server(NAS) is a device that provides some level of access to a larger network.
Before you install the client, it is recommended that you install the OpenVPN Access Server, which can be found here on OpenVPN's official website.
The access server processes the challenge and sends an updated Access-Request to the NPS server. .
The Cisco AAA server sends the network access profile to the network access server(the switch, AP, or router).
A network access server running as a stand-alone server or as a member of a workgroup does not support EAP-TLS.
Enable EAP as an authentication protocol on the network access server. For more information, see your network access server documentation.
The access server completes the connection process with the access client and sends an Accounting-Request message to the NPS RADIUS proxy.
The user or machine sends a request to a Network Access Server(NAS) to gain access to a particular network resource using access credentials.
Access Server is a QUIK module for boosting the performance of the principal system server while serving numerous users.
The access server completes the connection process with the access client and sends an Accounting-Request message to the NPS server, where the message is logged.
An advantage of using EAP-RADIUS is that EAP types do not need to be installed at each network access server, only at the RADIUS server. .
On the RADIUS proxy, the network access server is configured as a RADIUS client; and on each RADIUS server, the RADIUS proxy is configured as a RADIUS client.
The use of RADIUS allows the network access user authentication, authorization, and accounting data to be collected andmaintained in a central location, rather than on each access server.
For every zone file access server, the zone files are in the top-level directory called. zone. gz, with. zone.gz. md5 and. zone.gz. sig to verify downloads.
If the connection attempt is both authenticated and authorized, the RADIUS server sends an Access-Accept message to the NPS RADIUS proxy,where it is forwarded to the access server.
The access server, configured to use RADIUS as the authentication, authorization, and accounting protocol, creates an Access-Request message and sends it to the NPS server. .
Configure the physical RADIUS client, such as the VPN server ordial-up server, with information that allows the network access server to communicate with NPS servers. .
When the client sends an EAP message to the network access server, the network access server encapsulates the EAP message as a RADIUS message and sends it to its configured NPS server. .
If the connection attempt is either not authenticated or not authorized, the RADIUS server sends an Access-Reject message to the NPS RADIUS proxy,where it is forwarded to the access server.
The access server also sends Accounting-Request messages during the time in which the connection is established, when the access client connection is closed, and when the access server is started and stopped.