Examples of using Indicator flashes in English and their translations into Russian
{-}
-
Official
-
Colloquial
The left most indicator flashes.
The indicator flashes, when the power source is overheated.
While recording the red LED indicator flashes.
All the indicator flashes in green.
While charging the flash, the indicator flashes.
The MEMO indicator flashes for about 5 seconds.
Press the Mode button until the Holiday indicator flashes.
The status indicator flashes during mute.
When the volume is too loud, the[CLIP] indicator flashes.
LED indicator Flashes one time every 3 seconds.
While searching for the device, the radio LED indicator flashes.
When the indicator flashes, the battery must be recharged.
Press the Mode button until the Minute Minder indicator flashes.
The ZONE2 indicator flashes on the front panel display for approximately 10 seconds.
Press the Mode button until the Child Lock indicator flashes.
The indicator flashes white when performing the Schedule function by using the remote control.
The table below shows the settings and the number of times the indicator flashes.
The status indicator flashes quickly, indicating that the pairing process on this unit has been completed.
The power of the unit immediately shuts off, and the INPUT indicator flashes.
When you receive new messages,the new 31EN message indicator flashes on the answering machine and the handset.
LED indicator: When the USB connection, anddata transfer, the indicator flashes.
The blood pressure indicator flashes next to the relevant coloured bar depending on the WHO blood pressure classification.
The aperture value and/or shutter speed and/or metering indicator flashes.
In this case, the battery indicator flashes to indicate that you should disconnect the appliance from the wall socket before you can switch it on.
Release the INPUT button of the main unit when qD DTS indicator flashes.
If the magic finder during their operation starts charging, rapid charging andthe battery status indicator flashes on the display to about 80% the capacity is reached and with a slow loading process, and ultimately the full capacity is reached.
Press the Mode button until the Minute Minder indicator flashes.
Once the pairing process succeeds, the indicator flashes twice every 3 seconds.
When the macro switching index is midway between“0,3 m-∞”(normal shooting)and“0,2 m-0,35 m”(macro shooting), the indicator flashes.
When the product cannot focus automatically, the focus indicator flashes and the beep does not sound.