Examples of using Static test in English and their translations into Slovak
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
Static test.
It is called static test.
Static tests.
Pages with tag static test.
STATIC TEST METHOD.
Coupling device static test method.
Static test procedure.
Apparatus and equipment for static tests.
Static test of the Falcon 9.
Rear crushing test(dynamic or static test).
Rear crushing test(dynamic or static test)(see points 3.2.1.1.4 and 3.2.2.1.4);
Four for flight tests, one for ground tests and one static test machine.
In calculating the strength of the values of the static test coefficient chosen so as to guarantee an adequate level.
The Ta 183 V4-V14 were 0-series preproduction aircraft andV15-V16 were to be static test aircraft.
Also indicated is the static test pressure that newly manufactured sample of watches were exposed to in a leakage test. .
The Ta 183 V4-V14 were intended to be A-0 series pre-production aircraft andV15-V16 were to be static test aircraft.
It is usually accompanied by an indication of the static test pressure that a sample of newly manufactured watches were exposed to in a leakage test. .
A statement of the value of D as referred to in Appendix 2 for the dynamic test or the value of T(traction force)as referred to in Appendix 3 for the static test, and also the vertical load on the coupling point S.
The calculation must take account of the values of the static test coefficient chosen to guarantee an adequate level of safety: that coefficient has, as a general rule, the following values.
By the capital letter‘D' or‘S' according to which test wasperformed on the mechanical coupling(dynamic test= D and static test= S) above the rectangle surrounding the lower-case letter‘e'.
During static test, at the point when the energy required is attained in each horizontal load test prescribed or in the overload test the force must be greater than 0.8 F;
Moreover, the relative humidity is required to be low in the static test, and when tested in a dry environment, Eliminate the electrolysis potential.
For the purposes of checking their strength the mechanical coupling components must undergo a dynamictest under the conditions set out in Appendix 2 or a static test under the conditions set out in Appendix 3.
Static test" means the test during which the machinery or the lifting accessory is first inspected and the subjected to a force corresponding to the maximum working load multiplied by the appropriate static test coefficient and then re-inspected once the said load has been released to ensure no damage has occured;
Subject to a check on its construction characteristics,the towing device must undergo static tests in accordance with the requirements of points 1.2, 1.3 and 1.4.
First ground tests will be preceded by ground tests such as pressure tests, functional CO2 testing(similar to N2O at molecular level),and ultimately a static test on the launch rail.
A statement of the value of D as referred to in Appendix 2 for the dynamic test or the value of T(traction force)as referred to in Appendix 3 for the static test, and also the vertical load on the coupling point S.
