Examples of using A temperature difference in English and their translations into Spanish
{-}
-
Colloquial
-
Official
A temperature difference in degrees on the Celsius scale.
The cause of the heat flow is a temperature difference.
Goods without a temperature difference are not detected.
But all these deficiencies have one thing in common:they involve a temperature difference.
People also translate
Thermal engines convert a temperature difference into mechanical work.
Conversely, when a voltage is applied to it, it creates a temperature difference.
The effect creates a temperature difference by transferring heat between two electrical junctions.
Using this general approach,we can generate electrical power just from a temperature difference.
A temperature difference between the line and load sides of a pole indicate increased resistance.
As you know, a convection current occurs when there is a temperature difference in a material.
If you see a temperature difference on the screen, but the light is not changing color, try reducing the"+/- TEMP" setting.
Normally two separate tanks stored the liquid-oxygen andliquid-hydrogen fuels with a temperature difference between them of over 120 degrees Fahrenheit.
If there is a temperature difference between them, it is possible exchange heat without mixing the fluids.
Allow the equipment to stand for at least 2 hours before using if it is moved to a new location with a temperature difference of 20 or more.
When the device is transported so that a temperature difference of more than 20 C occurs, it must stay turned off for at least 2 hours before it can be turned on again.
Blue Amnesia XXL Auto cannabis seed boasts beautiful purple/violet hues if exposed to a temperature difference of -10 C at night compared to daytime.
However, in practice,there is always a temperature difference in any heat transfer process, and so all practical energy storage obtains efficiencies lower than 100.
It was observed that a compass needle would be deflected by a closed loop formed by two different metals joined in two places, with a temperature difference between the joints.
ATC is used to compensate for a temperature difference between the circulator and a defined measuring point in the bath tank that may develop for physical reasons.
BRIEF DESCRIPTION AND JUSTIFICATION(the meaning of the course in relation to the studies. Between 100 and 200 words.)The heat transfer is the transmission power due to a temperature difference.
The valorization of a temperature difference between the surface of hot seas(28 C) and depths(5-10 C) makes it possible to produce energy on ETM cycles, for powers of 100 kWe to several hundreds Of MWe.
The Carnot cycle for refrigeration is a theoretical thermodynamic cycle intended to represent the most efficient cycle for creating a temperature difference by doing a given amount of work.
The black surface of the thermopile absorbs radiant energy,thus creating a temperature difference between the center of the thermopile(hot seal) and the body of the pyranometer cold seal.
The Seebeck coefficient(also known as thermopower, thermoelectric power, andthermoelectric sensitivity) of a material is a measure of the magnitude of an induced thermoelectric voltage in response to a temperature difference across that material, as induced by the Seebeck effect.
Thermoelectricity refers to a class of phenomena in which a temperature difference creates an electric potential or an electric potential creates a temperature difference.
Onsager's reciprocity in the thermoelectric effect manifests itself in the equality of the Peltier(heat flow caused by a voltage difference) andSeebeck(electrical current caused by a temperature difference) coefficients of a thermoelectric material.
In one specimen, the isotope ratios in bones from different parts of the body indicated a temperature difference of no more than 4 to 5 °C(7 to 9 °F) between the vertebrae of the torso and the tibia of the lower leg.
MENU ATC- Absolut Temperature Calibration ATC serves to compensate a temperature difference that might occur between circulator and a defined measuring point in the bath tank because of physical properties.