Examples of using Programming operations in English and their translations into Spanish
{-}
-
Official
-
Colloquial
Repeat all the programming operations for all the SIG7710 modules that will make up the headend.
CLEAR button This button is used to cancel for certain memory or programming operations.
The programming operations can also be carried out with the system connected but not supplied with power.
This is the second report to be submitted,covering the first full year of programming operations of the Fund from 1 July 2007 to 30 June 2008.
Programming operations in this chapter require use of key“c” and the Led“n”(fig. 11) present on the receiver.
Access to TECHNICAL LEVEL programming and to the programming operations can be carried out only by the pushbutton panel relative to the first unit on the left.
New Trasdata is a unique tool supporting all microprocessors utilized by any kind of vehicles in the Automotive field,for reading and programming operations in JTAG, BDM and BOOT mode.
Except for the limit switch programming operations, it is possible to connect multiple NEOSTAR motors in parallel so as to utilise a single reverser switch.
The functions of the data management unit would also include data collection,key entry, programming, operations and maintenance of data files, programs and hardware.
For all programming operations and for interpreting the programming menus indicated in the following flowcharts, refer to the following legend.
Turn the appliance off at the ONOFF button, turn on the water tap and wait approximately 20 seconds before turning the appliance back on; repeat the programming operations and the selected wash cycle will start up again.
Emphasis will be placed on expanding technology-enhanced learning,moving programming operations closer to beneficiary bases through the regional offices and other networks and reducing printing by maintaining electronic filing.
C has served as the foundation, funnily enough, to more sophisticated and accessible forms of programming, butat the same time it is here to stay for low-level programming operations.
Although it is an important contribution to mainstreaming relief and recovery in programming operations, staff skills and competencies are not yet at the level required to fully operationalize the manual.
REMOTE CONTROL UNIT Using this unit make possible to set all operatingparameters of the unit, these parameter are shown in the LCD display to make the programming operations easier.
The functions of the DMUs would include data collection,key entry, programming, operations and maintenance of data files, programs, and hardware.
Account or other information to service providers engaged by us to execute certain activities including payment processing, mail or e-mail distribution, and other technical and processing functions,such as maintaining data integrity, programming operations, user services, or technology services; and.
The goal wasto involve traditional and new partners in resource mobilization, programming, operations and protection for the people of concern to UNHCR.
Progress in decentralizationwas also worth examining, he stated, noting that UNDP had decentralized most of its programming operations except for the approval of the CCF.
Programming, operation of the spraying systems.
This indicates that the programming operation has been successful. 5.
Programming operation in the use of keys.
For programming operation, push the PROG button then the.
The software features the teaching mode programming operation with precise positioning of all movements.
The programming operation may be repeated several times by using numbers included between 00000001 and 99999999.
The NEXT NXT-1 User Manual Rev. 7 covers the description, safety precautions,installation, programming, operation, and maintenance of the NEXT NXT-1.
So the timer should be set every time programming operation is to be performed.
The F4 IP User Manual includes a description, safety precautions,installation, programming, operation, and maintenance instructions for the F4 IP as of the release date of this edition.
Automation and Control Systems, PLC programming operation protocols, electric ducts.