Examples of using Isolation switch in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
First, the definition of isolation switch.
If the isolation switch has sound, the cause should be ascertained,
At the same time, check whether the contact of the isolation switch is in place.
When the isolation switch location, between the contacts have to meet the requirements of insulation distance
serious damage to the isolation switch transmission rod is found, it shall not be operated.
In the working process, the isolation switch is seriously corroded due to air pollution
CSB-EPB plastic bearing excellent anti-contamination ability to ensure high-voltage isolation switch work in a variety of bad environments(Pollution Level IV above);
Isolation switch(Disconnector) is mainly used in high voltage electrical installations will require partial blackout and reliably isolate live parts.
there is also an isolation switch capable of breaking the load,
The isolation switch does not have a special arc extinguishing device
so use this plastic bearing high-voltage isolation switch is no limit on the height of the installation,
Isolation switch, vacuum load switch,
especially in the domestic isolation switch design and manufacturing standards to catch up with leading international has created a possibility.
The insulator, cable, porcelain casing, isolation switch and other high voltage in power system For ultra-high pressure equipment, it is advisable to choose a 2500~5000V megohmmeter.
resulting in the closure after the failure phenomenon can not ensure long-term isolation switch stopped working properly.
the current domestic manufacturers by virtue of the success of the isolation switch overseas experience has gradually started.
after many years of use of proven engineering plastics self-lubricating bearings to rotate the risk of failure to become the most effective means of self-lubricating solve isolation switch.
If the isolation switch and the grounding switch are not properly operated due to the failure of the locking device,
Early isolation switch manufacturers at home
The incorporation of switch controlled isolation, phase and ground lift on channel B allows for further versatility providing isolation between the input