Examples of using Longitudinal sections in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Longitudinal sections bend once the width of 2,5 cm.
right sides together and prostrochite them on longitudinal sections.
Usually Acc longitudinal sections already bending the bottom.
Cleave and prostrochite him at a distance of 5 mm from the edge of longitudinal sections.
Prostrochite it on longitudinal sections and the bottom at a distance of 1.5 cm from the edge.
further down the longitudinal sections.
Longitudinal sections need to secure the"crabs" that are bought, together with self-tapping screws.
lining right sides together and prostrochite on longitudinal sections on a typewriter.
Perform and proutyuzhte double Acc longitudinal sections of width to 6 cm
Determine the width of the curtain, using the table below, adding 10 cm Acc allowance for longitudinal sections.
Fold the top and longitudinal sections outline the width of 1,5 cm Nadsekite allowance at the junction of the bands.
lining right sides inward and prostrochite on longitudinal sections and lower bevelled edge.
Expand the foot rails of the longitudinal sections and the bottom and fill the corner"in condition",
not forgetting the allowances on Acc bottom, top and longitudinal sections, and now know exactly how much fabric you need.
Fold once longitudinal sections on the width of 5 cm for the main fabric,
bend the edges of the longitudinal sections toward the center proutyuzhte
Double-Acc longitudinal sections of width 2 cm
the width of the bottom of the bending and longitudinal sections will depend on the width of the rapport the figure.
Finishing the longitudinal sections and a bottom- Acc
Wrong side will act as a front to finish the edges of the bottom and longitudinal sections, and the top is curved outward in the form of false lambrequin.
Fold linings on longitudinal sections and sew"the castle" in the center of each piece of cloth
Figure 4: Longitudinal section, heat emission plates on laths between joists.
Figure 14: Longitudinal section showing salinity(parts per thousand‰) in an estuary.
Figure 8: Longitudinal section, underfloor heating plate system.
Figure 8: Longitudinal section screwed from above, joists/beams.
Raschipite match on the longitudinal section.
A network profile in a longitudinal section;
With a cutting tool, a longitudinal section through the petiole up to about 1/3 of the leaf blade is performed.
Large plants are convenient to plant one in the base and making a longitudinal section can get a long boat for mass planting.
pins for the struts a longitudinal section 25 millimeters.
