Examples of using Reinforcing mesh in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
For primed floor staple gun mounted reinforcing mesh.
Reinforcing mesh should always be placed in the middle of putty.
P10- 10 mm as plaster with reinforcing mesh fiberglass.
Press the reinforcing mesh into the wet render with a smooth spatula.
using reinforcing mesh.
The wire used in our reinforcing mesh has a ribbed profile.
Reinforcing mesh, they perform both functions of waterproofing and screed.
For trim cap It needs reinforcing mesh and the actual selfmaterial.
Reinforcing mesh improves the strength characteristics of the mastic coating.
To be inside the monolith, reinforcing mesh must retreat from the surfaces of 50 mm.
Typically, pipe fittings is made to the already-stacked reinforcing mesh with a wire.
Attention! Reinforcing mesh should always be placed in the middle of putty.
The first layer of the solution is well tamped, after which the reinforcing mesh is placed.
If the reinforcing mesh is soft,
On top of the insulation is applied reinforcing mesh, as well as multiple layers of coatings.
The walls are made of cast blocks better equip fully functional device, reinforcing mesh.
Thus, the reinforcing mesh is a good layout for laying water pipes of floor heating.
In the manufacture of these products use heavy concrete brands, as well as reinforcing mesh.
On top of sand laid reinforcing mesh for strength and concrete is poured a layer of 5 cm.
For example, an insulating layer may be applied to attach the reinforcing mesh tube and using a wire.
Stela reinforcing mesh(with overlap of 5 cm)fasten her staple gun to the floor boards.
You can order a free sample of the reinforcing mesh to ensure the high quality of our product.
Reinforcing mesh can not be laid directly on the ground,
On the outer portion of the material is beaten reinforcing mesh, which is most often used for plastering.
Press the reinforcing mesh lightly into the surface of the wet render with a smooth spatula.
About 3.5 cm every two Foam concrete to be placed into a number of horizontal seams metal reinforcing mesh.
On top of laid reinforcing mesh, which is used for the manufacture of metal wire 6-8 mm thick.
Semi-dry screed has the strength anddurability through the use of fiberglass reinforcing mesh or additives.
For residential reinforcing mesh made of wire diameter 3 mm
If the blind area is not provided by the use of rebar or reinforcing mesh, you can add table salt.