Examples of using To the input in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Referred To the Input.
Well, inside the box we know, we do this to the input.
Equivalent to the input of digital RGB
as demonstrated by applying an 100kHz squarewave to the input.
People also translate
This frequency is feeded to the input B of the phase detector.
an object called a fileList is attached to the input.
Connect this side to the input… And this one goes to the output.
You may wish to use a JACK connection tool to connect some other JACK audio application to the input instead.
Nathalie was flexible with regard to the input and output zones of the housing.
Bugera bass heads like the Bugera Veyron BV1001M will fit into any existing bass rig seamlessly due to the input and output options.
Apply unregulated power to the input of the 78L05 and measure pin 8 of the micro controller.
An on-board potentiometer enables the output to be correctly calibrated to the input for ease of commissioning.
Connect a good 50R load to the input and connect a stabilised PSU(power supply unit) with a current limit set to 200mA.
we can add pattern=”d*” to the input for the same effect.
A button is connected to the input and with an app on your mobile phone, the button is configured to what should happen when
calibre will try hard to generate output that is as close as possible to the input.
A 22n capacitor on the output of the microphone couples the signal to the input of the first audio amplifier stage.
A mains PSU has been added to connect to the input of the pedal and eight power cables have been included to connect from the Polaris to all your other pedals.
Before you can record audio using the Voice-over tool, you will need to connect a microphone to the input jack of your PC sound board.
Use enabled job profiles that filter by metadata- The profiles applied to the input file will be filtered by metadata described in the XML file.
we can therefore quickly adapt to the input we receive.
directly from the air line to the input support switchboard fit two wires- one phase,
while coupling the incoming RF directly to the input of the receiver.
Magnetic switch detects when eg a door is closed, just connect one cable from the magnetic switch to the Input 1(white cable)