Examples of using Base surface in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The base surface is padded with s… More.
The rubber pad is in close contact with the base surface.
The ambient temperature above 8℃, the base surface temperature above 5℃ before construction;
Base surface treatment is the key to waterproof coating basement construction.
To stabilize the gun, try to stop the gun as little as possible, the gun should be perpendicular to the base surface, spraying oblique spray can not be.
The reliability of the base surface directlythe success of the entire construction.
Potassium silicate can also be used for corrosion aspects: potassium silicate clay, potassium silicate mortar paving block material surface layer can be used for ground, pit, trench lining equipment base surface and pools, slot.
Wide application: the base surface has a strong adhesion, the application is very wide range.
Important is the Paint with Stone Texture construction workers can paint a variety of different quality, different texture paint quality, different Faux Stone Textured Paint base Surface, and make the appropriate texture paint construction program.
Soft bag door leaf base surface of bottom oil coating shall not be less than two handle, and locks should be loaded.
Brick wall effect paint can be used for cement brick wall, foam, plaster, aluminum plate, glass and Other base surfaces, and brick effect spray paint can be painted freely with the shape of the building.
Polyurea house roof waterproof coating systems The base surface is cleaned the water content is not more than 9 the level is compact and the nodes are tidy and complete meeting the requirements The Waterproof Coating Roof contains no catalyst and is….
Tile adhesive exterior on concrete drywall Suitable for indoor and tile adhesive on drywall outdoor various cement mortar, tile adhesive on concrete and other base surface. The construction temperature should be 5-35°C. The tile adhesive exterior….
Bronze self-lubricating bearings used a kind of high density bronze alloy of special compositions as base, surface of alloy is rolled diamond type of the oil indents or half ball oil indents, this kind of bearing has higher density, load capacity, well wearing performance, longer lifetime.
The brick wall painted grey is made of special synthetic resin waterproof silicone-acrylic emulsion as the main adhesive material, and is made of natural colored sandstone as the aggregate material. Paint brick wall grey suitable for concrete, cement mortar, mixed mortar, masonry structure and various putty base surface decoration, paint wall look like brick especially for high-end residential, high-end villas, hotels and Other exterior decoration.
Suitable for indoor and tile adhesive on drywall outdoor various cement mortar, tile adhesive on concrete and Other base surface. The construction temperature should be 5-35°C. The tile adhesive exterior mortar should be controlled within 2-3 hours depending on the weather conditions. Do not mix the dried mortar with water.
Pasting sing-side glue on the based surface is strongly suggested as well as layering process.
The surface of the base paper is coated.
Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;
The surface of the base paper is coated with a.
Place the hanger in the required position and press the base against the surface to be insulated.
Thoroughly remove the base wall surface of floating ash, oil, mold release agent, empty drum and weathering materials that affect the bonding strength.
Paint primer evenly on the surface of base course, with no exposure of the lower surface to the air, no piles.
Manufacturing process: The fin strip(normally aluminum and copper) is folded into an L SHAPE and wound onto the base tube surface under tension.
Stick pin in place: Place the hanger in the required position and press the base against the surface to be insulated.
Avoids harmful metal loss or erosion of base metal surface or potential of surface defects with sand blasting.
On the base plastering surface, first hang the vertical and horizontal control lines, and then hang out the tile control line according to the size and arrangement of the tiles.
SPS, SPSE and EPC hydraulic pavers of TRXBUILD-Huatong adopt the imported components, and they are suitable for paving highway base and surface. With advanced technology, they are highly automated, user friendly and efficient pavers.