Examples of using Base surface in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
One cone consists of a base surface and a lateral surface area.
Application of self-leveling floor and the distribution of the base surface.
Cleansing the base surface without oil pollution ash water, water vapor.
and coupled to the base surface of the plaster, paint,
People also translate
Next, the base surface of the ground, and it bears a special glue.
the coiled material, between the coiled material and the base surface, and the single-sided tape is used for the backlap interface and the sealing bond at the end part.
The base surface must be cleaned
Then, the concrete screed for leveling of the base surface, the thickness of which is in the range of 10-15 cm.
Prepare the base surface: Clean from layers of old paint,
Beacons fastened to the base surface by sand-cement mortar, in which they are pressed to the desired depth.
Base surface What was the floor was not planned in the future to the floor,
Some valve parts, the positioning of the base surface of the lower precision,
Need waterproof base surface sand, uneven, moldy, contaminated by asphalt or other putty, base surface has a layer of oil, etc.
Some valve parts, the positioning of the base surface of the lower precision,
In order to ensure the base surface temperature of bonding strength above 5 °C, special low temperature environment can be produced.
Some valve parts, positioning base surface of the lower accuracy,
The claim of a four-sided surface to the base surface is identical to the claim that the height of the wall to the height of the pyramid is in the proportion of the golden section.
In the waterproofing construction of decoration, the base surface must be pretreated by sealing king to increase the adhesion between the waterproof base surface and other waterproof materials.
Most of the work involving fundamental mechanical properties of nanotubes was done by AFM based surface manipulations on a planar substrate.
Okay. I am going to call Surface Base.