Examples of using Should be fixed in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Lundy said it should be fixed by tonight.
We are cool now and have fixed the problems from the point where it should be fixed by ourselves.
Wheel of medium size should be fixed to the frame locknuts.
We recommend that 2-part finishing trims are used, in which case the back part of all trims should be fixed first.
In this case, the lips should be fixed in an o-shape.
Before installation of LED buried lamp, a hole should be digged according to the shape of the embedded part, and then the embedded part should be fixed with concrete.
The result of morning exercises should be fixed with a contrast shower.
The device should be fixed into position with cable ties or wide double-side tape.
Packaging: Wooden box and tray packaging, should be fixed by steel belt.
The trestle should be fixed on stable and plain surface such as wall by screw and nut.
Densely covering the nape hair talisman, flax should be fixed, tied under the neck.
Please note that the cord should be fixed tightly onto those two points, otherwise it will be useless.
For wall claddings, the overlaps between two purlins should be fixed by two rivets.
For every sheet, two sets of hooks should be fixed properly on one purlin, passing through the wave crest.
Do not operate if you mean that the system won't boot the micro SD is inserted into a Raspberry PI 3, in principle updated operating system andfirmware of Raspberry in the model if it works previously should be fixed.
Clogging indicator, clogging indicators should be fixed with corresponding torque values.
The molding die of the silicone case should be fixed on the vulcanization molding machine, then set the parameters such as temperature, pressure and time required for molding.
At each intersection of the bearing bar and the crossbar, it should be fixed by welding, riveting or pressure lock.
Every wave crest at vertical overlapping area should be fixed to the purlin by hooks, and reinforcing method should be taken in areas with heavy wind.
At each intersection of the bearing bar and the cross bar, it should be fixed by welding, riveting or pressure lock.
In the last version there was a certain delay when using the clip archives with command- key-combo which caused pasting wrong clips. this should be fixed. the clip archives did not work at all on overwriting existing slots. this is fixed. .
The in app purchase to remove ads bug should now be fixed.
The floor panels should be laid as a floating floor system and should not be fixed, in any way, to the sub-floor or to anyvertical structure. Ensure that proper gaps of at least 10mm(3/8 inches) from the walls and any vertical structures aremaintained during installation. These gaps are to be concealed with suitable skirting or expansion profiles after installation.
By then, my house should be all fixed up.
Thanks for pointing that out Clay, it should be all fixed now.
Prepare a single copper or steel power cord of 6 square mm or more, fix one end of the cord to antenna's support rod firmly, the other ends of cord should be tightly fixed onto the steel ring of the roof, use a sandpaper to remove the rust on the steel if necessary.