Examples of using The compression in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Control the compression time.
Then you can download your file after the compression completed.
No oil in the compression chamber.
The compression type'%1'is not supported by Ark.
Settings of the compression level.
People also translate
The compression ratio in the combustion chamber is 17.2.
How to reduce the compression ratio.
All the compression fittings are used for gas or oil.
Can I choose the compression level?
The compression ratio is advanced to increase output and PDI;
Change the compression parameters if you want.
Best performance of adjusting the compression of sealing.
Start the compression with the corresponding button.
Concrete, in turn, assumes the entire load of the compression.
How to reduce the compression ratio- Computer help for you.
We have a bunch of robots waiting anxiously to start the compression.
The compression of the front and rear wheels was different.
Piston rings seal the gas in the compression chamber of reciprocating compressors.
The compression ratio is advanced to increase output and PDI;
It happens when the pressure increases, leading to the compression of the gas.
Test the compression strength of air oil separator or oil filter.
At first, we had no explanation for the spinal fracturing until we realized that the compression fractures were caused by the extreme weight he was carrying.
Normally, the compression and extraction can be performed very rapidly.
There are three main principles of Nebulizer Machine, one is the ultrasonic atomizer, one is the compression atomizer, one is the micro net atomizer.
The compression tool does not need any special system in order to compress your PDF files.
This double vulcanizing press machine applies to the compression and molding of rubber, plastics, resins and other polymer materials.
The compression and bending test space is between the lower crosshead and test table.
Exhaust process: after turning the front end of the compression chamber to the exhaust port, start the exhaust and complete the working cycle.