Examples of using Correction factor in English and their translations into Ukrainian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Total correction factor".
For example, you gave a land area of 200 square meters,the base rate is 10, the correction factor- 3, zone- 4.
Error correction factor 3/4- Broadcasting is MPEG-4/ HD format.
Gamma the gamma correction factor.
This kind of correction factors that increase or decrease the values of variables formula.
We would like to extend our sincere thanks toDanny Larsen of Apogee instruments for calculating the correction factors for our lights.
Why all the correction factor needs to be individualized?
To get the actual power at 200 °F(93 °C), the designer must divide thepower at standard conditions by the air density correction factor.
The shear correction factor κ{\displaystyle\kappa} usually has the value 5/ 6{\displaystyle 5/6}.
Light refraction is different in air than it is in water so a correction factor is required to have reasonably accurate PAR measurements underwater.
The correction factor is necessary because more radiation is backscattered out of a radiation sensor diffuser in water than in air because the refractive index of water(1.33) is greater than for air(1.00).
To determine the average market price in formulaprice of a new car is multiplied by a correction factor based on the period of operation of the cars.
It offers to use correction factors that allow finding the level of financial potential with consideration of hidden(shadow) financial flows and also determining prospective levels of financial potential.
For the normal distribution, an unbiased estimator is given by s/c4,where the correction factor(which depends on N) is given in terms of the Gamma function, and equals:.
The liquid limit test is defined by ASTM standard test method D 4318.[3] The test method also allows running the test at one moisture content where 20 to 30 blows are required to close the groove;then a correction factor is applied to obtain the liquid limit from the moisture content.
After their introduction, directors soon incorporated correction factors that could compensate for ballistic conditions such as air density, wind velocity and wind direction.
This cannot be accurate since the shear stress is known to be parabolic even for simple plate geometries. To account for the inaccuracy in the shearstrain, a shear correction factor( κ{\displaystyle\kappa}) is applied so that the correct amount of internal energy is predicted by the theory.
To account for the inaccuracy in the shear strain, a shear correction factor( κ{\displaystyle\kappa}) is applied so that the correct amount of internal energy is predicted by the theory.
Plate theory Sandwich theory Timoshenko, S. P.,1921, On the correction factor for shear of the differential equation for transverse vibrations of bars of uniform cross-section, Philosophical Magazine, pp. 744.
Power Factor Correction.
Active power factor correction in all phases.
М53 Modern active power filters andswitchmode power supplies with power factor correction.
M53 Modern active power filters andswitchmode power supplies with power factor correction(Number of comments: 0).
These templates not only include flyback, forward and Power Factor Correction converters but also the popular models of the UC384X members implemented in documented examples.
AccuSine PCS+ is a flexible, high performance,cost-effective solution to stabilize electrical networks by providing harmonic mitigation, power factor correction, and load balancing.
Ranging from 10KVA to 30KVA, it's designed in small footprints with DSP technology andactive input power factor correction design to ensure better output voltage conditions, power quality and power performance at all times.
Power factor correction is the term given to a technology that has been used since the turn of the 20th century to restore the power factor to as close to unity as is economically viable.
With power factor correction and proper transformer design, connection of the heat sink, and filter design, the power supply manufacturer can reduce conducted interference so that the supply can achieve EMI regulatory agency approvals without incurring excessive filtering cost.
With power factor correction and proper transformer design, connection of the heat sink, and filter design, the power supply manufacturer can reduce conducted interference so that the supply can achieve EMI regulatory agency approvals without incurring excessive filter cost.