Examples of using Current flows in English and their translations into Ukrainian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Typical current flows throughout the Florida Keys(NOAA June 2010).
The patient puts his hands orfeet in a special cell with water through which current flows.
In soldered solder in special glass contact current flows in the electric appliances.
The Blixt breaker can also communicate digitally,collect data and measure and control current flows.
A long line connected to the generator Gw, current flows, which generates a corresponding magnetic field\(\vec B\).
Current flows through the LED continuously and is reduced or increased based on whether the LED is to be dimmed further or made brighter.
And we know, of course, that the convention is that the current flows from positive to negative, that that's the flow of the current. .
Electronic and electrotechnical industry- for a special kind of contacts,which are soldered into glass, which current flows into vacuum tubes.
This oscillating current flows down the antenna's transmission line through the radio receiver(represented by resistor R).
He found that at a current frequency of more than 700 Hz, an electric current flows across the surface of the body, without harming the tissues of the body.
Some bifilars have adjacent coils in which the convolutions are arranged so thatthe potential difference is magnified(i.e., the current flows in same parallel direction).
When the power is on, and the current flows through the field of the stator winding, a current is induced in the coil form.
In this case the Lorentz force drives the current in thetwo vertical arms of the moving loop downward, so current flows from the top disc to the bottom disc.
If we take the convention and we say current flows in this direction, it will hit this resistor, then the next resistor, then the next resistor.
The diode junction separates the electrons and holes,creating a potential difference between the n and p contacts, and a current flows if a resistor is placed between the contacts of the diode(Figure).
It is now known that whenever current flows there will be an associated magnetic field in the surrounding space, or more generally that the movement of any charged particle will produce a magnetic field.
Its essential component is a metal wire orstrip that melts when too much current flows through it, thereby interrupting the current. It is a sacrificial device;
An inductor, also called a coil, choke or reactor, is a passive two-terminal electrical component that storesenergy in a magnetic field when electric current flows through it.
A pair second wire, assuming that the electrical current flows in it in the opposite direction, completely balances this field, which creates interference.
The junction of the diode separates the electrons and the holes,giving rise to a potential difference between the contacts n and p, and a current flows if a resistor is placed between the contacts of the diode(figure).
Gradually reducing the frequency of the oscillator first, we will get to the 1/8 mode wavelength, where, under certain conditions, we may see the first non-classical phenomenon-the lack of MP around the conductor through which the current flows.
Experience has shown that the effects of the magnetic field on thecurrent varies depending on the shape of the conductor, in which the current flows, the location of the conductor and the direction of the current. .
When it is in the positive state of the work(i.e.,at both ends with forward voltage), the current flows from the LED anode cathode, semiconductor crystal emitted from the ultraviolet to the infrared light of different colors, light and the strength of the current. .
Conduction heat cools by putting the heat sink in direct contact with the heat source,allowing the heat to flow away from the source much like an electrical current flows through a system.
Thus, in the conduction carriers appear,and when the semiconductor circuit on her current flows, or application of an external electric field current flows, which changes depending on the light.
The conductor offers a certain resistance, akin to friction, to the displacement of electricity, and heat is developed in the conductor,proportional to the square of the current(as already stated herein), which current flows as long as the impelling electric force continues.
When it is in the positive working state(that is,plus the forward voltage at both ends), the current flows from the LED anode to the cathode, the semiconductor crystal to issue different colors from ultraviolet to infrared light, light intensity and current related.
Within two weeks he will publish the results of his experiments, showing that two parallel wires,through which an electric current flows, are mutually attracted if the current goes in one direction and mutually repel if the current goes in opposite directions.
When it in a positive state of the work(that is,at both ends with forward voltage), the current flows from the LED anode, cathode, semiconductor crystals on the issue from the ultraviolet to infrared light of different colors, light and the strength of the currents. .
Inductive coils in electronics typicallyuse magnetic cores to minimize parasitic current flow.