Examples of using Setpoint in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Setpoint and alarm.
Compared to the setpoint values.
This setpoint should be set high enough to.
Selects b5-19 as PID setpoint value.
Time from when the SETPOINT is reached to when the unit is with in stability specification.
You will not be able to set up a setpoint.
Room temperature or setpoint temperature display selectable.
Keeping weight off is hard butit may be easier if we improve the brain's emotional setpoint.
Heating and cooling setpoint limitation.
Intelligent temperature control(The machinefan will start if internal temperature up to setpoint).
Number of matches won Match points Set ratio Setpoint ratio Results between tied teams(head-to-head record).
This setpoint, following resolution of the acute infection, is a strong predictor of long-term disease progression rates(Mellors 1995).
The optimal behavior on a process change or setpoint change varies depending on the application.
Three pH level setpoints can be adjusted by the operator: a dosing setpoint and two alarm setpoints.
DDC is farmore flexible in changing reset schedules, setpoints and the overall control logic.
Whether you try to go under your setpoint(lose weight) or over it(gain weight), your body resists changes by regulating your hunger levels and metabolic rate.
A heating system must work hard for extended periods to maintain the temperature near the floor orat the thermostat setpoint, wasting precious energy and dollars.
There is profile data for ppO2, setpoint, CNS and OTU, as well as deco ceiling, NDL and stop time.
If derivative action is over-applied, it can lead to oscillations too. An example would be a PV that increased rapidly towards SP,then halted early and seemed to"shy away" from the setpoint before rising towards it again.
PI control loopsdo not perform well when setpoints are dynamic, where sudden load changes occur or if the throttling range is small.
When setpoint temperatures close to the ambient temperature are required in the waterbath to be as constant as possible, the unique Peltier cooling unit CDP 115 cools the medium water down to 10 °C precisely, economically and in an eco-friendly way, with a precision of±0.1 K.
And settings for the wheel and for all of the mouse's seven buttons can becustomized for individual preferences within the included Logitech SetPoint software or with Logitech Control Center software for Mac, available via download.
The S7-300F monitors the setpoint and the effective velocity with the values of various sensors that are attached to the motor shaft or monitor the cable velocity directly.
This will reduce the heating demand of the heating coil when the outside air temperature is below the supply setpoint temperature and the return air temperature is higher than the setpoint, the heat would otherwise be rejected to atmosphere.
If the sensor is a“smart sensor” meaning that is it specifically designed to“communicate” with a digital controller, then it may also be offered with an LCDreadout that can display space temperature, setpoint, and even outside air temperature, provided that there is an OA temperature sensor hooked into the BAS somewhere along the line.
In the example of the furnace above working at various temperatures, if the heat being applied does not bring the furnace up to setpoint, for whatever reason, integral action increasingly moves the proportional band relative to the setpoint until the PV error is reduced to zero and the setpoint is achieved.
The cooling coil can be used to further reduce the moisture content by removing more heat,but of course this will decrease the air temperature below the supply setpoint, if this occurs then the heating coil can also be turned on to bring the temperature back up, this will work although it is very energy intensive.