Примеры использования Accuracy can на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Accuracy can up to DIN5 level.
The filtration accuracy can be up to 0.05um.
Other measurement methods are permitted if an equivalent accuracy can be demonstrated.
The accuracy can vary depending on the target type and ground conditions.
Very high dimensional accuracy can be obtained.
The accuracy can be easily corrected and made linear by the software.
The temperature control accuracy can reach±0.1ºC.
However, accuracy can depend on material characteristics and environmental conditions.
With selectable gravity or blow-out(motor assisted) dispensing, high volumetric accuracy can be achieved.
Times, to ensure the accuracy can not be side by side.
Such an accuracy cannot be reached with the float switch principle tank indicators that are normally used.
As mentioned in Section1 of this report, the ARS proposes three perspectives by which accuracy can be assessed.
It seems there is a way: accuracy can be developed by training shoot bubbles.
The complainant also refers to the jurisprudence of the Committee according to which complete accuracy can seldom be expected from victims of torture.
But the estimation of exact accuracy can be provided only for few weeks of development iteration.
However, some details or information on our sites may be contained in files orformats for which total accuracy cannot always be guaranteed.
Test operations have shown that the accuracy can be improved, even if the jerk increases by a factor of 2.
Accuracy can also be described in terms of major sources of error for example coverage, sampling, non-response, response, data capture, coding.
High-performance workstation Biomek FXP with high positioning accuracy can meet the demands of any laboratory automation.
Did you know that accuracy can suffer in small series production with alternating processing procedures?
With the prior approval of the approval authority, less than 10 reference points are permitted, if an equivalent accuracy can be demonstrated.
In the former case, the accuracy can be assessed through statistical indicators e.g. related to the sampling techniques applied.
However, due to positioning accuracy limitations for civilian GPS devices aswell as in urban areas with tall buildings, the positioning accuracy can be reduced.
The more accurate the diagnostics is,the greater accuracy can be ensured during the radiation, providing maximum protection of the surrounding healthy tissues.
Accuracy can also be described in terms of major sources of error for example coverage, sampling, non-response, response, data capture, coding.
If the network is established in cooperation the same accuracy can be received with less monitoring stations, and only one hub would be needed.
Positional accuracy can be improved when relevant spatial objects(e.g. buildings) to which most of the data are related are assigned to coordinates of their point location, and this only has to be done once.
Based on the results of AutoForm-ThermoSolver plus, crash simulation accuracy can be improved by taking the real strength distribution of the hot-formed component into account.
However, accuracy can be significantly higher with sophisticated grid-based techniques, especially those coupled with particle methods(such as particle level sets), since it is easier to enforce the incompressibility condition in these systems.