Примеры использования Horizontal position на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Horizontal position*/.
COOL/ DRY/FAN: horizontal position.
Horizontal position measured.
Leg to place in a horizontal position.
In horizontal position, this happens after 30 seconds.
Dry without wringing in horizontal position.
In a horizontal position.
Model is always pushed to the horizontal position.
Fold the table into the horizontal position by pulling in the direction of arrow» Fig. 80.
Thigh massage Leg to place in a horizontal position.
Place the iron in horizontal position or press the steam.
Install the projector in a stable horizontal position.
Store the brakes in a horizontal position, in dry rooms and dust and vibration-free.
Push the sun visor back to the horizontal position.
The customer chooses the option with horizontal position of"Nominations" and"Shares" blocks and makes comments on the"Nominations" block.
The shaft must be always in horizontal position.
In order to work with moulds in a horizontal position(mainly semi-finishing and finishing), we offer the Xpider high-speed Top Gantry machine.
It may be carried only in a horizontal position.
HRZ CHAMBER SUSPENSION Horizontal position overhead installation.
Jar with sample vibrates radially in a horizontal position.
Suggested installation position: Install the valve in horizontal position, coil upright, considering a tolerance of± 15 between the coil and the vertical axis.
The operator places the onions in the right horizontal position.
The shaft must be in horizontal position always.
In the last few years bottles with wine have been stored in a horizontal position.
While leg must have either a horizontal position, or to be raised.
After that, numbers are printed on the side of the passport will be in a horizontal position.
EMS(ПВЛ) can be stored in stacks in a horizontal position withkeeping the following requirements.
The Polnet silos are designed for assembly in the horizontal position.
Make sure that you maintain a horizontal position of the tool.
Extensions: 15 cm, 30 cm,45 cm(for the use of fitting elements and use in a horizontal position).