Примеры использования Maximum density на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Tungsten bucking bar offer the maximum density available.
Maximum density of liquid water is at four degrees Celsius.
Tungsten bucking bar offer the maximum density available.
Maximum density in the country is 1380 persons per km² and is registered in Chisinau municipality, which is 10 times more compared to national average.
Special exemplars of indicolite are famous for its maximum density of tones.
In particular, H2O has a maximum density at a temperature of four degrees Celsius.
Mixing and separation of substances with a maximum density of 1.2 kg/m3.
High Density: the maximum density may be higher than 19g/m3 with tungsten content from 80%W to 98%W and in strict accordance with your requirements.
Highest-capacity enterprise drive,up to 4TB for maximum density server and storage solutions.
For instance, the maximum density still life within an 8×8 square is a regular grid of nine blocks, with density 36/64 0.5625.
Since the density of tungsten alloy cube is so high and the maximum density should be 18.6g/cm3.
It is shown that the anomalous feature of water(maximum density at 4 C) at given hydrometeorological conditions leads to two hydrodynamic effects which have opposite influence on the thermal bar movement.
Before buying paper should refer to the instructions of your equipment, what maximum density, it can be used.
Media Name: gasoline, xylene, neopentane,diisopropylamine; maximum density: 700kg/ cubic meter; effective tank volume: 19.3 m3; dangerous goods item category No.
Until 1901, the liter was defined as one kilogram of water without additives at a pressure of 760 millimeters of mercury and a temperature of 3.98 degrees Celsius,corresponding to the maximum density of the H2O.
The results of experimental investigations with the effect zone maximum density detection, at which the regeneration without a cicatrisation is possible.
The effective tank volume 39 cubic meters; tank dimensions: long straight section 9168mm, two small end diameter of 1758mm, the tank was a central wedge, central large diameter 2492mm, wedge height 274mm, tank total height 2766mm, Transportation media:anthracite, the maximum density of 780 kg/ cubic meter.
When the angle of observation is propitious, gazing through the main body of this realm of maximum density, you are looking toward Paradise. Our local universe, Nebadon.
Density regulation: providing minimum rather than maximum density standards; establishing clear density standards at city-wide level, such as floor area ratios, in support of compact city development with a hierarchy of higher-density, mixed-use clusters around public transport nodes;
Since the density of tungsten alloy is so high and the maximum density should be 18.6g/cm3.
At the pressures as indicated in 7.3.2.3(1) to(4) andthe static gravity forces caused by the contents with maximum density and maximum filling degree the design stress σ in longitudinal and circumferential direction of any layer of the shell shall not exceed the following value.
When the angle of observation is propitious, gazing through the main body of this realm of maximum density, you are looking toward Paradise.
Harrow ANTARES 4x4 is recommended for use in climates with soil moisture up to 40% and the maximum density of the earth in the treated layer of up to 3.5 MPa, and in places with lots of vegetable crop residues.
The appliance has the following features:-Flat-bed scanner with movable over the whole scanning area scanning head(fixed Scanglas)-Trilinear color CCD 3 x 8000 pixels-Pattern precision 14-bit/ pixel-maximum density 4.0 max-optical resolution dpi 3150 Frc0pxmd-Scan range 305 x 432 mm-Review(item, neg.), superv.
The greatest density andnumbers of the Cormorant are observed in the south Belarus- in the regions with maximum density of fish-farms, playing an important role in settlement processes and in growth and support of current numbers of the species.
To ensure the maximum life span of our products we only use high-quality HR foam with maximum density that is more elastic and durable than regular foam.
At the pressures as indicated in marginal 21X123(1) and(2)the static gravity forces caused by the contents with maximum density specified for the design and at maximum filling degree, the design stress σ in longitudinal and circumferential direction of any layer of the shell shall not exceed the following value.
When the angle of observation is propitious, gazing through the main body of this realm of maximum density, we are looking toward the residential universe and the center of all things.
At the pressures as indicated in 6.8.2.1.14(a) and(b), andunder the static gravity forces caused by the contents with maximum density specified for the design and at maximum filling degree, the design stress in longitudinal and circumferential direction of any layer of the shell shall not exceed the following value.
When the angle of observation is propitious, gazing through the main body of this realm of maximum density, you are looking toward the residential universe and the center of all things.