Примеры использования Tangential на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Tangential force F.
With weak and tangential evidence.
Tangential grinders Honing machines.
Calculator for tangential belts.
Tangential feedrate: 0.126 to 2.53 mm/ min.
Besides, the blades may cut tangential semicircles.
Cross(tangential) Flow Filtration Equipment.
The filler's work is taken into account in the tangential direction.
Γ tangential acceleration at roller surface.
This command makes a tangential arc between two objects.
Tangential, and conical barrel cutters are supported.
On the fold collar coat of Kirov they found tangential gunshot injury.
The plane tangential to the point of impact shall be horizontal.
The mist will disappear every time the tangential cooling fan is started.
Is the tangential preparation officially safe enough for Zirconia works?
Maximum diameter of the gear by tangential method 10 grades: 2400/800 mm.
The tangential and the transverse long-wave low-frequency approximations are constructed.
Creating a computer model of tangential sand trap means Blender 3D editor.
From the Catania-Messina, reaching the toll of St. Gregory,continue tangential direction Palermo.
Via straight line: tangential or perpendicular Via circular arc.
Follow the signs for Highway Catania-Messina,continue tangential direction Messina.
Now, it shows tangential direction to the last point of the line being formed.
Blow-Through Airlock MPSH,Discharge Airlock MPSJ, Tangential Airlock MPSK.
Sir, we could give them a tangential mission, maybe task them with guarding HS?
From the Catania-Palermo, follow the signs for Highway Catania-Messina,continue tangential direction Messina.
The water will drop on tangential fan and cause water splashing out from indoor unit.
If you pres the[Shift] key when selecting the edge, the tangential alignment is rotated by 180.
My methods invariably necessitate a variety of expenses that,to the untrained eye, may appear somewhat tangential.
Trenching wheel driven by two tangential drive motors located on one side only.
The results of experimental studies of the process of cutting with the use of tangential ultrasonic vibrations.