Приклади вживання A groove Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
How to cut a groove in the beam.
Middleton states that a groove"….
Colt used a groove diameter of .454";
And they are fastened to each other on a groove(5mm).
Make a groove, put eggs, salt and a spoonful of oil. 3.
The elements are fixed together by a groove.
Laying of partitions from a groove block of thicknesses.
But now, we have settled back into a groove.
That can abrade the tooth, create a groove and eventually saw off the crown.
For the key under the star on one side of the shaft is a groove.
Be sure to see if there is a groove for the spool.
Make a groove in the flour, pour out the salt, sugar and yeast and mix.
In this case, the ends of bars cut a groove under the wooden dowel.
Make a groove, add salt, egg and, gradually pouring water, knead the dough.
In other musical contexts,a riddim would be called a groove or beat.
Technology create a groove similar to the corner connection bar in the keys.
On the tee of small calibers a single extractor with three legs and a groove for the middle barrel head is installed.
If you want to get a groove, subject to special head part formed seams between tiles.
A groove machined into the upper receiver guides the bolt cam pin and prevents it and the bolt from rotating into a closed position.
The seedling is placed in a groove made in a new pot, and gently sprinkled with earth.
Pull up a groove track and the pit in whichIt will be in the pond- the end point of our creek.
At the top of the pillars is cut a groove, the width of the transverse and planks driven into the slot with a mallet.
We dig a groove deeper and lay out the first level of teeth at a depth of 11-12 cm.
The easiest way to purchase standard kantorez with a groove, they sold a lot, All manufacturers offer several models with fixed or variable angles.
It maintains a groove for holding line and is an oval shape, making it more snag resistant.
The ejector-rod was longer and had a groove in its knurled tip; a three-inch-barrel variant was offered, with a yet longer ejector rod.
Previously, we planted a groove for planting with a flat-cutter, and laid teeth into it, and now we have begun to press a peg and throw teeth there.
The connectors are equipped with a special“key”- a groove that will help prevent the wrong connection of different parts, showing the only correct connection.
If in the first case, a groove was made on top of the logs, in this case, the groove is cut from the bottom.
V-shaped, allow you to make a groove with a wall that is inclined at an angle of 45 degrees, they are used for embedding letters and decorations;