Приклади вживання Adhesive layer Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Adhesive layer: Water resistant.
Platform with adhesive layer- 1pc.
Top superimposed film that protects the adhesive layer.
Video: Which adhesive layer laid tiles.
Remove the special tool adhesive layer.
Remove the adhesive layer with a degreaser.
It is applied directly to the adhesive layer.
Removing the adhesive layer is made with nail.
When the amount in 10-15 centimeters, adhesive layer 3-4 mm.
What is needed adhesive layer for laying tiles.
Laminated paper is not self-adhesive(has no adhesive layer).
Tape, covering the adhesive layer, separated.
The adhesive layer can withstand considerable stress at break.
Master used the gel nail polish, having poor adhesive layer.
The low viscosity of adhesive layer general uses EVA;
Disposable neck crepe paper with an adhesive layer.
Eventually the adhesive layer dries, film begins to be disconnected.
Video: Why can not exceed the maximum for the tile adhesive layer?
First, what determines the adhesive layer for laying tiles size of the material becomes.
Attention: the larger the tile size, the greater the adhesive layer must be applied.
In addition, the adhesive layer between the pipe and the barrier layer provides a firm bond.
Subsequent rows of blocks placed on the adhesive layer is notmore than 0.7 cm.
Modeling thick gel of pink color,transparent with a high degree of viscosity. Has an adhesive layer.
It suffices to remove a protective layer of paper and an adhesive layer was pressed to the smooth surface.
The adhesive layer loses its properties over time, so you have to press the thermometer-sticker to the forehead with your hands.
In this way, by trowel with teeth in 8 millimeters,is applied on the tile adhesive layer 4 mm.
The adhesive layer on the adhesive tape is not subject to chemical changes, which is why this material is ideal for temporary fixation.
If the room is dominated by the normal conditions, then the adhesive layer may dry only three and a half hours.
The adhesive layer has moderate adhesive characteristics, it is securely sticked to any surface, but can be easily removed without any marks.
After applying some quantity of cottonacetone on the adhesive layer you need to wait about 30 seconds, then take a sponge and wash the sticky layer, after soaping the place.