Приклади вживання To be painted Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Children are to be painted.
All surfaces to be painted should be thoroughly cleaned with a detergent.
Tom's house needs to be painted.
The plastic does not need to be painted after installation, because you can buy the material in any color.
Well the cars need to be painted.
The tractors have started to be painted in corporate colors- red and gray, on their sides appeared the logo- three triangles.
The deck needs to be painted.
When calculating the area to be painted, you need to subtract the area that will not be painted.(windows, doors, etc.).
Cedar siding does not need to be painted.
If the image needs to be painted, then do it yourself.
It provides adhesion of the surface to be painted.
Next, it needs to be painted green.
So now there is a clean canvas that needs to be painted.
The stairs need to be painted, first.
Some we consider painting but not all are able to be painted.
Houses need to be painted.
Sand physique locations to be painted and include bumpers, windows, with overlaying papers or tape to protect them from your colour and cut.
Not having the ability to be painted- Gram.
Including two repaints and one blank ready to be painted.
For that first barrel to be painted in one color(fully).
Quality doors have a long service life,but every model needs to be painted or repaired every year.
From the surface, that needs to be painted, wash away the dust, grease and dirt, to dry off.
A significant advantage-the windows and doors do not need to be painted every year. Simply wash well.
There is an option for it to be painted in any colour from the RAL range.
This ladder is also going to be painted eventually.
Color material does not need to be painted, it does not fade in the sun;
Remember that these cars like to be painted in bright colors.
Every year or two tracks need to be painted again, then with them will be no problem.
Windows and facade elements that do not need to be painted should be covered with newspapers or film if possible.
If the nozzle has a seam,stripes will necessarily remain on the surface to be painted, as a result the surface cannot be made perfectly smooth and even.