Примери за използване на Passivation на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Automatic passivation equipment.
This phenomenon is called passivation.
Therefore, the passivation film is easy.
Passivation treatment of stainless steel.
Surface treatment: passivation.
In this case passivation occurs sequentially and not simultaneously.
Zinc-plating with trivalent yellow passivation.
Chromium acid passivation, Oiled.
Zinc-iron plating with trivalent black passivation.
Chemicals for pickling and passivation of stainless steel.
Zinc-plating plating with trivalent black passivation.
This can remove oxide or passivation layers, coatings or fouling.
The passivation must be applied for half an hour and is possible on a wet surface.
After the destruction of the passivation film, the corrosion resistance is decreased.
Nitric acid is the usual strong oxidising agent used for chemical passivation.
Semiconductors, metallic interconnects, and passivation glasses are all susceptible.
Passivation can be achieved by cryogenic freezing or controlled oxidation.
After the required time has been maintained, the passivation is removed from the product.
Bright galvanizing- alkaline and acid with colourless, blue, yellow,black and green passivation.
This phenomenon is called passivation and is seen in other metals, such as aluminum and titanium.
Titanium has good stability in acid, alkaline andbrine solution because it can form a passivation oxide film.
Quicken the surface passivation of aluminium alloy material by means of potassium permanganate.
Aluminum is remarkable due to its low density andits ability to withstand corrosion due to the passivation phenomenon.
Before opening the battery, a passivation is required to inactivate the chemicals in the battery.
Passivation layers, e.g. at anodized aluminium will increase resistance of a material surface to erosion and corrosion.
It also can be used for the oiling and the passivation treatment of the etching hot-rolled steel before the reel in the roll.
CitriSurf 2550 is a high quality blend of chemicals formulated for the cleaning and passivation of stainless steel products.
The passivation film of stainless steel is extremely thin, about 1-10 nm, the film is not very uniform, and the local is always defective.
It is oxidized in air at about 933 K(660 °C,1220 °F), although an oxide passivation layer forms even at room temperature.
A phenomenon known as passivation makes the steel less reactive with its environment, preventing the oxidation reaction that occurs in iron.