Примери коришћења Old coating на Енглеском и њихови преводи на Српски
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
Too, perfectly picks out the old coating.
If there is an old coating, it must be removed.
Release the nails in advance from the old coating, if any.
Otherwise, the old coating will have to be removed with a grinder.
There are three ways to remove the old coating from the walls.
To remove old coatings, such as paint or wallpaper, a flat nozzle is ideal.
Before painting, the ceiling is cleaned from the old coating and spatula.
In this case the old coating must adhere well to the substrate.
With good power of this tool,the process of removing the old coating occurs very quickly.
All old coatings that can preserve fungus and microorganisms must be removed.
But it can be solved,since you can always remove the old coating and fill in the new one.
Work to remove old coatings from surfaces can begin after the dismantling of devices.
To do this, every 5-7 years, it is applied a protective layer,removing the old coating.
Then sandpaper scraped off the old coating, not forgetting to remove the gaps and cracks.
Very small areas can be stuck with adhesive tape(use masking as usual tape can damage the old coating when it is removed).
Before lay on top of old coating new linoleum, it is necessary to carry out restoration work.
To do this, before starting the installation,the base is cleaned from the old coating, the dirt is removed from the surface and degreased.
Without removing the old coating, you can change the color of the walls, but not the look of the composition;
If you lived before unscrupulous owners who pokleit wallpaper on top of old coating layers have to shoot- there's nothing you can do about it.
Imitation of the old coating also implies the presence of cracks and grooves on the outer layer of material.
However, to ensure the reliability of the layer is possible only after removing the deformed old coatings and using a primer that suppresses the development of microorganisms.
If in some places, the old coating dispersed and wrapped joints, they are put in order with a special sealant.
Usually plastic products are painted at the production stage, but sometimes it may be necessary to repaint the product(or its part) in a different color in order tochange its appearance or restore the old coating.
When using any of the methods of removing the old coating from the walls should use personal protective equipment.
Usually plastic products are painted at the production stage, but sometimes it may be necessary to repaint the product(or its part) in a different color in order tochange its appearance or restore the old coating.
When using chemicals to remove the old coating, it is necessary to apply the chemical to the wall with brushes or rollers, starting from the top edge.
General use of chemical and electrolytic methods for pickling, pipe anti-corrosion chemical pickling only, can remove oxide scale,rust, old coating, and sometimes can be used as a blasting rust after reprocessing.
If you decide to completely dismantle the old coating, it is necessary to choose the substrate under the new linoleum, in order to make the foundation more even and warm.
Ordinary use of chemical and electrolytic methods for pickling disposal, pipeline anti-corrosion only chemical pickling, can remove oxide scale,rust, old coating, and sometimes can be used as sandblasting after rust removal.
To do this,the surface is cleaned of the old coating, remove everything that is badly held and exfoliated, because the lining will not be good for a long time on such a basis.