Примери коришћења To prepare the solution на Енглеском и њихови преводи на Српски
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
How to prepare the solution.
To prepare the solution, each substance must be taken in a strictly defined amount….
Honey is used to prepare the solution.
To prepare the solution using 15-20 g of magnesium sulfate per 10 liters of warm water.
Using a mechanical homemade concrete mixer to prepare the solution will be physically very difficult.
To prepare the solution, add 10 tablespoons of urea to a bucket of water(10 liters).
A total of 5- 10 drops per 100 ml of water is sufficient to prepare the solution used for rinsing and nasal washes.
To prepare the solution take hydrated lime 2 kg per bucket of water and add clay 3 kg and mullein 0.5 kg.
In one lyophilizate is 50 mg(poroshochka)which is used to prepare the solution for further intranasal administration.
To prepare the solution of 1% take 100g of copper sulphate and 100g of quicklime to 10l of water.
Today, there are many recipes for how to prepare the solution with your own hands, but it must be understood that there is no….
To prepare the solution, we need a tablespoon of collection and two glasses of boiling water.
Compliance with all these rules will allow not only to understand how to prepare the solution, but also how to do it qualitatively.
To prepare the solution for rubbing, iodine and camphor oil are mixed in equal amounts(10 milliliters each).
Questions will be raised about using fertilizer at home and in the field, the value of mullein, its composition and properties,how to prepare the solution.
To prepare the solution at home, it should be diluted with warm water to the powder in the vial label.
Available in the form of drug dosingsublingual spray, tablets, drops, capsules, applied sublingually(under the tongue that is), films(to be applied on the gums),the concentrate used to prepare the solution for injection, tablets, sustained release.
To prepare the solution, it is necessary to observe some subtleties and follow the instructions for use and use.
To prepare the solution, you need to take 1 ampoule and dissolve its contents in 1 liter of water, and then spray the pear.
To prepare the solution, you need to take 90 ml of ferrous sulfate per 20 l of water or 60-150 ml of copper sulphate per 16 l of water.
To prepare the solution at home, it is worthwhile to dilute the warm water powder to the label in the vial.
To prepare the solution, it is necessary to pour 3-4 leaves with a liter of boiling water and boil it in a water bath for 15- 20 minutes.
To prepare the solution, it is allowed to use only clean container(basin or bucket), a clean stick or mixer(for the mixing procedure itself) and pure water(preferably at room temperature or slightly warmer).
Content 1 How to prepare the solution for plaster 2 How to apply plaster 3 classic method of applying plaster 3.1 Calculator number of plaster Plaster work is done not only for leveling the surface, but also to give it a different decorative properties.
In order to properly use the bath,you need to directly prepare the solution itself, soaking the tablets/ crystals, making a mixture of herbs.
To prepare the treatment solution, you need a teaspoon of kitchen salt diluted in 1.5 liters of water.
It is a granule designed to prepare a solution that needs to be taken inside.
When the cake is decorated with this plastic mass,it is necessary to prepare a solution of vodka and honey in the ratio 1:1.
When the usage of Litecoin block capacity is over 50%,we will start to prepare for a solution to increase the 1MB block size limit through a hardfork or softfork.”.