Primjeri korištenja Flashover na Engleski i njihovi prijevodi na Hrvatskom
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
And explains the flashover.
What about the flashover and the evidence of heavy and low burns?
He wanted to see the flashover?
At the same time, flashover can damage the surface of the casing.
This place is gonna flashover!
I'm pinned down in a flashover, I want Tommy Welch coming to get me.
It's a phenomenon know as flashover.
I'm pinned down in a flashover, I want Tommy Welch coming to get me.
Maybe 24 hours before total flashover.
He wanted to see the flashover? And why is that?
And why is that? He wanted to see the flashover?
This place is gonna flashover! Hey, hurry up!
Hey, hurry up! This place is gonna flashover!
The flashover conditions require a 35maliges playthrough, to reach the payout maturity.
Perfect conditions for a flashover.
Until eventually, a process called flashover happens. The fire then grows and develops, as more fuels thermally decompose.
There's evidence of heavy andlow burns, a flashover.
The basis is that the sound wave generated by the flashover discharge of the fault point is used for positioning.
But there were accelerant pour patterns, a flashover.
Flashover breakdown point, after breakdown the constant current source can maintain the arc, a stable current through the bridge, the bridge has enough sensitivity.
These patterns are a heat effect from the flashover.
Flashover is when a fire in a room supply of combustible gases and the fire becomes ventilation controlled. becomes a room completely on fire, everything burns, you have a huge.
In a two-story frame house. Died of a flashover Andy Darden.
The instrument uses low-voltage pulse method and high-voltage flashover method to detect various faults of the cable, anddirectly test the flashover and high-resistance fault of the power cable without burning through.
Said that the gas explosion in Jessica's apartment caused a flashover.
The length of the protective resistor is selected such that when the test object breaks down or flashover, the protective resistor shall not flash along the surface and its length shall be capable of withstanding the maximum test voltage with adequate margin.
The tested cable must withstand a VLF(Very low frequency)AC voltage for a specified testing time without flashover.
So high, quite high up on that wall. Now,there's clearly been some flashover, there's a small window about so wide.
So high, quite high up on that wall. there's a small window about so wide, Now,there's clearly been some flashover.
If it is a flashover high-impedance fault, the direct-flash method is used to test the fault distance, if the fault property is high leakage The resistance is generally measured by a high-voltage impulse discharge method.