Examples of using Base layer in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Select portion of base layer.
Base layer: Customers' request.
If practical, a sand base layer is recommended.
The base layer dries at least 5 days.
For this purpose,a roller is applied first light base layer.
China Base Layer Powder Paint.
Remove the excess powder with the brush,a little bafly the nail plate and again the base layer.
Supportive base layer of traditional foam.
Synchronous fiber chip sealer is widely use in road surface,bridge waterproof and seal the base layer.
The base layer should be inspected before GCL construction.
As paper, fleece may be used as a base layer for other types of wallpaper.
Base layer to create a uniform foundation for plaster and glue.
Designed to keep you warm or cool, the base layer adapts to your environment.
Base layer, which determines the overall strength of the laminated panels.
In addition, the paper may be a base layer for other types of wallpaper- this will be discussed below.
Base layer of plaster with fiberglass mesh reinforcement inside(item 6)….
Then, a conventional process of DPL-pressing, in which, in fact,going to all the laminated panel with the base layer and the substrate.
The base layer for a conventional adhesive tape has sufficient.
It is sued for preventing contractioncrack caused by new road semi-rigid base layer, and reinforces and prevents road surface crack caused by foundation crack reflection.
The base layer should be compact and flat, without pits and water, without stone roots and other sharp objects.
It is sued for preventing contractioncrack caused by new road semi-rigid base layer, and reinforces and prevents road surface crack caused by foundation crack reflection.
Military Base Layer Shirt: ●60% modacrylic 40% cotton with anti-static, ●320gsm Waffle Grid tan color fabric;
It is sued for preventing contractioncrack caused by new road semi-rigid base layer, and reinforces and prevents road surface crack caused by foundation crack reflection.
PU white is the base layer for printing heat transfer label, it acts as the background of the color, increasing the color saturation.
The high performance, seamless surface,is an in-situ applied rubber base layer, covered with multiple layers of an elastomeric structural spray polyurethane wear layer. .
Flame Retardant Fleece Base Layer: ●60% modacrylic 40% cotton with anti-static, ●340gsm single side fleece tan color fabric;
Either the image is applied to the base layer using acrylic paints, or else use the banner or vinyl with a ready pattern.
If used as a base layer polymer flooring itself, it needs to be fixed along the walls damper tape and prepare a solution.
Military Birdseye Base Layer: ●60% modacrylic 40% cotton with anti-static, ●280gsm Birdseye tan color fabric;
Side paving, side seaming, solid base layer and full joints can make the paving tile more durable and avoid rupture during use.