What is the translation of " SURFACE HARDNESS " in Chinese?

• 表面硬度

Examples of using Surface hardness in English and their translations into Chinese

The tooth surface hardness reaches HRC58-62.
牙齿表面的硬度达到HRC58-62。

From the above description shows, Vickers hardness is one of the surface hardness.
从上面介绍可知，维氏硬度是表面硬度的其中一种。

The tooth surface hardness reaches HRC58-62.
牙齿表面的硬度高达HRC58-62。

It is especially applied to outdoor, other plastic crown, and has good surface hardness and luster.
特别适用于户外、其它塑料冠，具有良好的表面硬度和光泽。

Especially when the surface hardness tends to the lower limit.
尤其是表面硬度趋于下限时。

Surface hardness testing can be done by using a rockwell hardness tester(HR).
表面硬度检测可采用洛氏硬度计（HR）进行检测。

In addition, the two rolling contact surface hardness matching is also very important.
此外，两个接触滚动体表面硬度匹配也很重要。

The surface hardness of the base layer should not be less than 1.2 MPa.
硬度计的表面硬度应不小于1.2MPa。

The selection of test force(scale) is related to effective hardening depth and workpiece surface hardness.
试验力（标尺）的选择与有硬化层深度和工件表面硬度有关。

If the surface hardness is required, a heat treatment process needs to be added.
如果需要表面硬度，则需要添加热处理工艺。

The selection of test force(scale) is related to effective hardening depth and workpiece surface hardness.
试验力（标尺）的选择与有效硬化层深度和工件表面硬度有关。

A high surface hardness from your coating is one of the best ways to increase tool life.
涂层带来的高表面硬度是提高刀具寿命的最佳方式之一。

Vickers hardness tester is an important means to test the surface hardness of heat-treated workpiece.
维氏硬度计是测试热处理工件表面硬度的重要手段。

The surface hardness can reach HRC58-63, and the core hardness is HRC30~42.
表面硬度可达HRC58～63，心部硬度为HRC30～42。

The selection of test force(scale) is related to effective hardening depth and workpiece surface hardness.
卷板机试验力（标尺）的选择与有效硬化层深度和工件表面硬度有关。

The teeth are the strongest part of the human body, and the surface hardness is similar to that of the crystal.
首先，牙齿是人体最坚固的组成部分，表面硬度和水晶相近。

The main technical parameters of chemical heat treatment workpiece are the depth of hardened layer and surface hardness.
化学热处理工件的主要技术参数是硬化层深度和表面硬度。

The material is generally carburized steel, and the surface hardness of the material after heat treatment is not less than 45HRC.
材料一般用渗碳钢，热处理后材料表面硬度不低于45HRC。

The main technical parameters of the chemical heat treatment work are the depth of the hardened layer and the surface hardness.
化学热处理工件的主要技术参数是硬化层深度和表面硬度。

Objective: To improve the surface hardness, wear resistance and fatigue strength of steel parts, the heart still maintain the toughness state.
目的：提高钢件表面硬度、耐磨性及疲劳强度，心部仍然保持韧性状态。

With the hardness tester test results should be the base layer of the surface hardness of not less than 1.2 MPa.
用硬度测试仪检测结果应是基层的表面硬度不低于1.2兆帕.

Steel quality(the unevenness of the surface hardness of the steel or the difference in characteristics tends to increase the difficulty of polishing).
钢材品质（钢材表面硬度不均匀或特性上有差异往往会增大抛光难度）。

Compared to the base polymer, glass filled materials provide improved mechanical properties such as higher rigidity or strength and may also have improved surface hardness.
与基础聚合物相比，玻璃填充材料提供改善的机械性能，例如更高的刚性或强度，并且还可以具有改善的表面硬度。

Its surface hardness can reach 55-65HRC, the volume hardness can reach 50-62HRC, and its hardness gradient is evenly distributed.
表面硬度可达5-65HRC，体积硬度达到5-65HRC，且硬度梯度分布均匀。

Nitriding of M50/M50NiL can significantly increase surface hardness(up to~70 HRC), resulting in the main attribute of improved resistance to contamination.
M50/M50NiL的渗氮可显著提高表面硬度（高达~70HRC），从而提高抗污能力这一主要性能。

FISCHER offers high-performance measurement devices for quality control of the functional coatings, which enable you to measure surface hardness and other mechanical properties exactly.
FISCHER提供高性能测量设备，帮助您实现功能性涂层的质量控制，让您能够精确测量表面硬度及其他机械属性。

Increase the surface hardness of metal parts by using the surface carburizing, and the surface color will be darker after carburizing;2.
增加金属零件的表面硬度采用表面渗碳，渗碳后表面颜色也会偏黑；2。

Second, the heat treatment process: If the improper heat treatment, steel surface hardness uneven or different characteristics, will cause difficulties for polishing.
二，热处理工艺：如果热处理不当，钢材表面硬度不均或特性上有差异，会给抛光造成困难。

Usually its surface hardness can reach 55-65HRC, volume hardness reaches 50-63HRC, and the average hardness gradient distribution.
整体硬度高：表面硬度可达到55-67HRC，体积硬度达到50-63HRC，且硬度梯度分布平均。

Tempered glass changes the crystal structure inside the glass, enhances the surface hardness, the glass impact resistance, bending strength than the ordinary glass 3-5 times.
钢化后的玻璃改变了玻璃内部的晶体结构，提高了表面硬度，玻璃的抗冲击度、抗弯强度比普通玻璃提高3-5倍。