Examples of using Material surface in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Cleaning and degreasing the material surface.
Material surface S3: shiny, for chromium cold rolled.
No formation of condensate on the material surface.
Depending on material surface, check if the bonding result can be improved by grinding or applying of primer.
The general aether-pressure also affects a most even layer of charge at a material surface.
People also translate
However, the protective oxide coating on the material surface is not desirable when it comes to electrical engineering.
If the z-offset is set to zero,it works"in focus," meaning the focus is exactly on the material surface.
Working as magnets on ferromagnetic material surface, easy to apply, remove and change, without residue.
The Material surface is then activated, which causes reactions with the surrounding medium air, water, lubricants.
The desired engraving is created in the subsequent acid bath, where the material surface is removed from the unprotected areas.
In“Material Surface” for the innovative technology of its hydro lubricants and in the“Design Thinking” category for the equally cutting-edge process used to develop them.
What works in one application may not work in another, especially if a material surface is dry or oily.
If the laser beam is focussed sufficiently on the material surface, the beam intensity reaches many gigawatts per square centimetre.
If an integrated X-Shut base is not in use at themoment, there is, in addition to the noble look, the advantage that does not stick to the material surface where objects can hang.
Hence the focus for"piercing" for example is on the material surface, but is"pushed in" to the material for the actual cutting process.
The composition is applied to a wet surface active ingredients react with the cement concrete to form a stable crystalline complex, dense fill any cracks on the material surface.
Pilot drilling or centering is only recommended on an irregular orinclined material surface and, if needed, for higher position accuracy.
With the TruDisk Pulse 421, you will be able to weld copper more efficiently, with less spatter and higher welding seam reproducibility-all of this independent of the material surface quality.
As with traditional Vickers hardness testing, the material surface is exposed to the tip of an indenter with a defined geometry(= Vickers diamond) with a predetermined force.
The microorganisms not only grow in the fermenter, but also in the inside of biogas conducting pipes and equipment and lead,by interaction with the material surface, to corrosive damage.
Pilot drilling or centering is recommended on an irregular or inclined material surface, when there is need for high position accuracy and generally in holes under 0.8 mm.
Under the motto"Research for the World of Tomorrow- The HZDR'sProjects for the Future," Rossendorf scientists demonstrated, for example with the help of billiard balls, what happens in a material surface if it is bombarded with ions.
Today, kalwar is a specialist in international demand,who develops solutions for material surface treatment in cooperative partnerships with customers from diverse industries.
The special highlight of IndiTherm is the precise focusing on the temperature of the material to be controlled: Conventional infrared cameras can external thermalinfluences, caused for example by heat reflections from the nozzle or hot runners on the cooling roll and on the material surface, just partly fade out.
Order make tungsten copper gasification military supplies, and smooth reduce absorb a lot of heat,reduce the quality of the material surface temperature, it must ensure that the pores of the tungsten skeleton, with good connectivity and good ventilation effect, as well as a low copper content.
Principle processes that determine the timber drying kinetics are related to movement of humidity in a liquid andvaporous state inside the material with evaporation from the material surface and steam diffusion in the environment.
Into the international advanced technology, high energy ultraviolet photons directdamage to the molecular bond many non metal material surface, the molecules from the object, this way does not produce high heat, ultraviolet laser beam machining and minimal aggregation, almost no heat effect, so it is called cold processing, it is suitable for the special material super fine play marking and carving.
Simple and reliable connection to SAP is thus possible with all TruMark lasers. Here,the marking laser takes the place of the printer, and the material surface of the workpiece replaces label or paper.
And high-end jewelry box material elements:material elements is fine high-end jewelry box by with material surface of texture and texture, now of consumers very attention of material of environmental, environmental and health is directly linked of, this is a important of marketing points; and it directly related packaging of overall function and economic cost, and production processing way and the packaging waste of recycling processing, many of problem.
The printing process is particularly durable and high quality,as it possesses a velvety, material surface that appears slightly raised above its surface. .