Examples of using Guide rails in English and their translations into Greek
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Official/political
-
Computer
Width of guide rails.
Guide rails and inhibiting device are installed in both sides.
Width Of Guide Rails.
If the concrete floor is ready,channels should be opened for guide rails.
Width of guide rails(mm).
This usually move along the guide rails.
Double guide rails to keep stable of machine.
Taiwan PMI square guide rails.
Its drawer guide rails allows it to be pulled out effortlessly.
It can produce up to 100 window guide rails in 24 hours.
Vertical linear guide rails imported from Taiwan, high precision, stable.
The company can produce up to 100 window guide rails in 24 hours.
Equipped with 4 guide rails to ensure safety and steady.
The technology is capable of producing up to 100 window guide rails in 24 hours.
Equipped 4 guide rails, to ensure the cargo elevator runs more smoothly and steadily.
Canvas moves along the guide rails along the opening.
For the strength to not staggered worktops,mounted on the back of the guide rails.
Auto-oiling system for guide rails and gear rails. .
Stable extension- due to the VEL connector for stable andquick connection of guide rails.
Taiwan TBI balls screws,HIWIN square guide rails, high precision, large load.
The guide rails space between X, Y feeding bed increases(1600mm), leading to the expansion of slides.
Product Features:* Slider with Octahedral longer guide rails to guarantee operation precision.
Equipped with 4 guide rails and 4 guide wheels to ensure safety and steady.
They are easily stored and slide quietly along guide rails fixed only into the ceiling.
The guide rails are mounted on the edge of the wood and the opening of the rail is reserved near the edge of the wall.
We are a professional manufacturer of elevator guide rails, fishplates, clips and other accessories.
(8) The X axis, Y axis guide rails and rack are protected by lateral plate and protective chamber, it will avoid dust.
Supportive arms shall be bolted with the uprights so that the guide rails can be put on the supportive arms.
The mast is equipped with 4 guide rails for the carrier of the drill head and a suspension for the feed device.
If this is not possible, then a conventional plasterboard sheets need to put a guide rails at a distance of 40 cm from each other.